4OM-1431-006_w.pdf - 第206页

3-49 Erroe ID Error Name, Description, Cause, and Remedy 4b2105 SSC network abnormal There is a problem with the connection between the position board MR- MC10-U83channel2andamplier . (1) Shut down the machine and …

100%1 / 271
3-48
Erroe ID Error Name, Description, Cause, and Remedy
4b2009 P.C.B Height Measurement
Detected a curve more than permission values. (- direction)
-----
4b200a P.C.B Height Measurement
Error of the result measured by a master jig (height)
Check if the master jig (height) has some dirt and foreign particles.
4b200b P.C.B Height Measurement
Failed in wearing height revision.
-----
4b2011 P.C.B Height Measurement
Measurement time-out
-----
4b2081 P.C.B Height Measurement
Abnormality occurred for communication with a sensor
-----
4b2082 P.C.B Height Measurement
Failed in wearing height revision.
-----
4b2083 P.C.B Height Measurement
Measurement time-out
-----
4b2101 SSC network abnormal
There is abnormal in SSC network.
Please
conrmthecableofSSCnetwork.
4b2102 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U82
channel1andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2103 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U82channel2andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2104 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U83channel1andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
3.9 Others
0802-002
3-49
Erroe ID Error Name, Description, Cause, and Remedy
4b2105 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U83channel2andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2)
Checkwhetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2106 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U84channel1andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2)
Checkwhetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2107 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U84channel2andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2108 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U90channel1andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2109 SSC network abnormal
There is a problem with the connection between the position board MR-
MC10-U90channel2andamplier.
(1) Shut down the machine and check the connection between the position board
andamplier.
(2) Check
whetherornotthemulti-axisamplierisdamaged.
(3) Checkwhetherornottheservoampliersaredamaged.
4b2201 Illegal Operation
ThereisnoPatternprogramle.
-----
4b2301 Feeder (Servo Error)
Alarm Code:A0 - Internal Parameter Error (Breakdown of Control P.C.B.)
Please replace the feeder. (Do not disconnect the feeder in powering on,
otherwise it may cause the inside data broken.)
3.9 Others
0802-002
3-50
Erroe ID Error Name, Description, Cause, and Remedy
4b2302 Feeder (Servo Error)
Alarm Code:A1 - Over Current Error (Foreign substances in the tape feeding drive
section)
Conrmwhetherornotthetapeisbeing
jammedonthepath./Conrmthereelto
operatesmoothly./Conrmwhetherornotsomecomponentsanddustarebeing
caughtinthesprocket./Conrmwhetherornotsomecomponentsanddustare
being caught in the tape feeding gear.
4b2303 Feeder (Servo Error)
Alarm Code:A2 - Others
-----
4b2304 Feeder (Servo Error)
Alarm Code:A3 - Others
-----
4b2305 Feeder (Servo Error)
Alarm Code:A4 - Main Circuit Power Supply Error (Please check the power supply
voltage.) (G04)
Please check the power supply voltage.
4b2306 Feeder (Servo Error)
Alarm Code:A5 - Fault Speed Error (Tape catching)
Conrm
whetherornotthetapeisbeing
jammedonthepath./Conrmthereelto
operatesmoothly./Conrmwhetherornotsomecomponentsanddustarebeing
caughtinthesprocket./Conrmwhetherornotsomecomponentsanddustare
being caught in the tape feeding gear.
4b2307 Feeder (Servo Error)
Alarm Code:A6 - Others
-----
4b2308 Feeder (Servo Error)
Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)
Conrmwhetherornotthetapeisbeing
jammedonthepath./Conrmthereelto
operatesmoothly./Conrmwhetherornotsomecomponentsanddustarebeing
caughtinthesprocket./Conrmwhetherornotsomecomponentsanddustare
being caught in the tape feeding gear.
4b2309 Feeder (Servo Error)
Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control P.C.B. and
Defective servo motor)
Please replace the feeder.
4b230a Feeder (Servo Error)
Alarm Code:Ab - System Error
Please replace the feeder. (It may be caused by trouble of the control P.C.B..)
4b230b Feeder (Servo Error)
Alarm Code:Ac - Reckless Run Detection Error
Please replace the feeder. (It may be caused by trouble of the control P.C.B..)
3.9 Others
0802-002