4OM-1431-006_w.pdf - 第198页

3-41 Erroe ID Error Name, Description, Cause, and Remedy 496801 Conveyor Width Automatic Setup (Input conveyor W2) An error occurred in the transfer driver comunications. (1) Check the communication cable. (2) Check the …

100%1 / 271
3-40
3.7 Automatic Setup
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
496606 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496607 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496608 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496717 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496718 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496727 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496728 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496737 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496738 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496747 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496748 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496757 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496758 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496767 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496768 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
3-41
Erroe ID Error Name, Description, Cause, and Remedy
496801 Conveyor Width Automatic Setup (Input conveyor W2)
An error occurred in the transfer driver comunications.
(1) Check the communication cable. (2) Check the power cable.
496802
-----
496803
-----
496804
-----
3.7 Automatic Setup
0802-002
3-42
3.8 Head-Related Errors
0709-001
3.8 Head-Related Errors
Table 4C9-1
Erroe ID Error Name, Description, Cause, and Remedy
4A0101 Head Zero Return
NLaxiszeroingError.Pleaseconrmthenozzlehasnotfallenwhenyoupush
the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stopbutton.(Pleaseconrmthenozzlehasnot
fallenwhenyoupushthebeam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0102 Head Zero Return
HLaxiszeroingError.Pleaseconrmthenozzlehasnotfallenwhenyoupush
the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stopbutton.(Pleaseconrmthenozzlehasnot
fallenwhenyoupushthebeam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0103 Head Zero Return
L1axiszeroingError.Pleaseconrmthe
nozzlehasnotfallenwhenyoupushthe
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stopbutton.(Pleaseconrmthenozzlehasnot
fallenwhenyoupushthebeam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0104 Head Zero Return
L2axiszeroingError.Pleaseconrmthe
nozzlehasnotfallenwhenyoupushthe
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stopbutton.(Pleaseconrmthenozzlehasnot
fallenwhenyoupushthebeam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0105 Head Zero Return
L3axiszeroingError.Pleaseconrmthe
nozzlehasnotfallenwhenyoupushthe
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stopbutton.(Pleaseconrmthenozzlehasnot
fallenwhenyoupushthebeam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.