00193407-02 HWWS SIPLACE Machine Accuracy EN.pdf - 第113页

. Seite 13 © Siemens AG . . Änderungen vorbehalten SIPLACE Placement Systems ¾ fix the revolver head front part at the head stand, or al ternatively, place the front part into the protective cover (delivered with a new h…

100%1 / 138
. Seite 12
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
¾ screw on the intermediate board.
¾ pay specific attention to the screw length.
10 mm
9 mm
M 3x5
7 mm
Assembly Z-Axis (continuing)
. Seite 13
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
¾ fix the revolver head front part at the head stand, or alternatively, place the front part into the
protective cover (delivered with a new head) if available.
¾ check whether all parts on the top side are OK.
¾ mount the driving plate loosely.
¾ take care the cable is placed appropriately (looped, not twisted)
Assembly Z-Axis (continuing)
. Seite 14
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
Attention:
If the raceway exchange has been carried out, do not forget to remove the forced-air tubes from
the worn raceway and insert them in the new one (allen wrench 0.71 mm).
Adjust the 0.5 mm distance with the aid of the 5/10 gauge for forced-air tubes.
Tighten the grub screws (DIN 916 M1,6 x 2,5mm) carefully so that the tubes do not bend or brake.
Assembly Z-Axis (continuing)