00193407-02 HWWS SIPLACE Machine Accuracy EN.pdf - 第115页
. Seite 15 © Siemens AG . . Änderungen vorbehalten SIPLACE Placement Systems ¾ remove any contaminat ion from the raceway. ¾ insert the raceway. ¾ insert the screws (D IN 912 M3x5mm ), do not tighten them. ¾ place the ra…
. Seite 14
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
Attention:
If the raceway exchange has been carried out, do not forget to remove the forced-air tubes from
the worn raceway and insert them in the new one (allen wrench 0.71 mm).
Adjust the 0.5 mm distance with the aid of the 5/10 gauge for forced-air tubes.
Tighten the grub screws (DIN 916 M1,6 x 2,5mm) carefully so that the tubes do not bend or brake.
Assembly Z-Axis (continuing)
. Seite 15
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
¾ remove any contamination from the raceway.
¾ insert the raceway.
¾ insert the screws (DIN 912 M3x5mm), do not tighten them.
¾ place the raceway gap gauge in star position 1.
Assembly Z-Axis (continuing)
. Seite 16
© Siemens AG . . Änderungen vorbehalten
SIPLACE
Placement Systems
¾ place the gauge for the raceway onto the star motor shaft.
¾ tighten the raceway screws.
¾ use new screws to tighten this part.
Assembly Z-Axis (continuing)