00193407-02 HWWS SIPLACE Machine Accuracy EN.pdf - 第119页

. Seite 19 © Siemens AG . . Änderungen vorbehalten SIPLACE Placement Systems C&P M 8000, M 10 000 : z-axis gauge shown below must be used alternative Attention: only C& P M 8000, M 10000 head Assembly Z-Axis only…

. Seite 18

SIPLACE

Placement Systems

¾ tighten the screws of belt fastener.

¾ mount the belt fastener in the same position on the belt as before. It is visible on the crush

marks.

¾ place the belt fastener on the toothed belt such in a way that the edges are on the teeth or on

the space.

¾ the single parts of belt fastener can be aligned with a 10 mm spanner.

Z-belt belt fastener

Assembly Z-Axis (continuing)

Check belt tension using belt tension meter:

C&P DLM head: 280 +- 10 Hz

. Seite 19

SIPLACE

Placement Systems

C&P M 8000, M 10 000: z-axis gauge shown below must be used

alternative

Attention: only C&P M 8000, M 10000 head

Assembly Z-Axis only M 8000, M 10000

. Seite 20

SIPLACE

Placement Systems

C&P M 8000 / M 10000

¾ loosen and remove the hexagon socket head screw (1.5 mm allen wrench) of

z-axis upper stop.

¾ place a 0.3 mm feeler gauge on the upper stop.

¾ push the z-axis stop in the direction of the belt fastener and tighten the screw of the

z-axis upper stop.

¾ remove the feeler gauge and the gauge for z-axis upper stop.

¾ check belt tension using belt tension meter:

belt tension: C&P head: M 8000 / M 10000 head: 190 +- 10 Hz

upper stop z-axis

Assembly Z-Axis only M 8000, M 10000