SM411F_Service Manual.pdf - 第122页

Softwar e 1.1. Check the ‘Mark5.ini’ File and ‘Vision.ini’ File Before delivery of the SM41 1 machine from the factory , the ‘ ini ’ file is set as follows: 1.2. Factory Const ant 1.3. Debug Const ant Mark5.ini [T ARGET]…

100%1 / 245
Software
█ SM400 S/W Back up folder structure
Backup Folder: D:₩SMBackup
File for specification of Backing up folder and Destination: C:₩Bin₩BackupList.dat
File contents
[BackupDir] => Back up position
D:₩SMBackup₩
[BackupFiles] => Back up item
C:₩SmartSM₩Log₩Error.log
C:₩SmartSM₩Log₩Operate.log
C:₩SmartSM₩PartDB₩UPD.mdb
C:₩SmartSM₩System₩System.stm
C:₩SmartSM₩System₩Factory.stm
C:₩SmartSM₩System₩Serial.txt
C:₩SmartSM₩System₩PM_USER_SM411.mdb
C:₩SmartSM₩System₩PM_USER_SM421.mdb
C:₩SmartSM₩PCB₩*.*
C:₩SmartSM₩PdInfo₩*.log
Software
1.1. Check the ‘Mark5.ini’ File and ‘Vision.ini’ File
Before delivery of the SM411 machine from the factory, the ‘ini’ file is set as follows:
1.2. Factory Constant
1.3. Debug Constant
Mark5.ini
[TARGET]
MachineType=30
Real=1
Sync=1
ModuleDown=1
VisModDown=1
VisSimul=0
RunSMVISION =1
LanGage=0(1: English ,0:Korean)
[Directory]
InstallDrive=c:
HomeDir=C:\Mark5
BinDir=C:\Mark5\bin
PartDir=C:\Mark5\partdb
SystemDir=C:\Mark5\system
PCBDir=C:\Mark5\pcb
LogDir=C:\Mark5\log
TempDir=C:\Mar54\temp
VmeIplDir=C:\Mark5\vmeipl
Vision.ini
[TARGET]
Real=1
BitmapSimul=0
DPVersion=2
Interrupt=1
SendVMEInterrupt=1
Software
1.4. System Constant
Module
No
Constant Name Classification
Value
Unit Description
21
System OPT_DOOR_OPEN Use 34 Const
D0-D3 : Front Door D4-D7 : Rear Door
>>0:No Check(NO) 1:Low Speed(LOW) 2:Emergency(EMER)
Value: Front, Rear
0 :NO, NO
1:LOW, NO
2:EMER, NO
16:NO, LOW
17:LOW, LOW
18:EMER, LOW
32:NO, EMER
33:LOW, EMER
34:EMER, EMER
19
MACHINE_NO Use Const Machine number setting.
Machine
20
Factory
MACHINE_TYPE Use 1 Const
Type of Machine
0 : The type without upward vision system.
1 : The type with upward vision system.
4
OPT_SIG_TYPE Use 0 Const Type of tower lamp (It is used by the MMI)
5
OPT_SIG_RED Use 2,112 Const Setting related to the operation of the tower lamp
6
OPT_SIG_YEL Use 257 Const
D0-D1: IDLE
D2-D3: RUN
D4-D5: PAUSE
7
OPT_SIG_GRN Use 292 Const
D6-D7: FREEZE
D8-D9: ADJUST
D10-D11: EMER
Tower Lamp
8
System
OPT_SIG_BLUE Use 0 Const
0: ACT_OFF
1 : ACT_ON
2 : ACT_BLINK