SM411F_Service Manual.pdf - 第179页

Electric Device 3. In order to remove the feeder control bo ard, unscrew the bolts (6 sets) of the internal covers at the left and right si des of the machine in the following figure by using a screw driver with a ‘+’ sh…

Electric Device

3. In order to remove the feeder control board, unscrew the bolts (6 sets) of the

internal covers at the left and right sides of the machine in the following figure

by using a screw driver with a ‘+’ shaped tip and remove the covers.

4. Remove the connector connected to the corresponding board.

부착 위치 - 전면기준

①

BRACKETT 조립

SCREW

M4*8으로 2개소체결

②

BOARD 체결

SUPPORT

SCREW

M3*6으로 체결

M3*6

2개소 M4*8 "I" 마킹

Feeder Control Board Location

2sets

Marking “I”

Location of Board

Secure the Board

With Screw(M3-6 sets)

Secure the Bracket

With Screw(M4-2sets)

Electric Device

①

BRACKET 조립

SCREW

M4*8으로 2개소 체결

② CONVEYOR BOARD 체결

SCREW M3*6으로 6개소 체결

우측면 후면

후면 우측부

③ Feeder IO BOARD 체결

SCREW M3*6으로 2개소체결

SUPPORT M3*30 4개소 체결

④ Feeder IO ExtentionBOARD 체결

SCREW M3*6으로 4개소체결

M3*6

M3*30

2개소 M4*8 "I" 마킹

②보드부착- SCREW

M3*6으로 4개소체결

M3*6

5. Unscrew the fixing screws to remove the corresponding board by using the

screw driver and replace it.

6. The assembling is performed in the reverse order of disassembling.

Conveyor Sub I/F Board

CAN CONVEYOR BOARD FEEDER CONTROL BOARD

At the Right of the

Rea

1. Assemble the Bracket

By Using Screws(M4-2sets)

2. Assemble the Conveyor Board

By Using Screws(M3-6sets)

3. Secure the I/O Board

By Using Screws(M3-2sets)

And Supports(M3- 4 sets)

4. Secure the I/O Extension Board

By Using Screws(M3-4sets)

M4-8mm 2sets

Marking “I”

Assemble the Board by using screws(M3-4sets)