SM411F_Service Manual.pdf - 第64页

13. After finishing the teaching, click th e <Update> button to apply the changed value. F3_Ref# F3_Ref#

11. When teaching on the fiducial marks of the selected station is finished, perform

teaching on the fiducial marks of the other stations in the same way.

12. .Perform steps #2 ~ #12 for each station according to the following order:

StationF1 -> StationF2 -> StationR2 -> StationF3.

F2_Ref#

F1_Ref# F1_Ref#

13. After finishing the teaching, click the <Update> button to apply the changed

value.

F3_Ref# F3_Ref#

1.2.6. X-XY Compensation

This is performed to compensate the XY error that occurs while moving the X axis.

If the thermal mapping and gantry mapping have already been enabled, disable the

mapping by force to perform the X-XY compensation.

Caution

X-XY compensation is performed at the factory before the

machine is shipped. An exclusive calibration tool is needed

to perform this calibration.

In general cases, skip this calibration process and perform

the next calibration process.

Figure 1-5. "X-XY Compensation" dialogbox

 Mode Option button

Select the mode in which this process is to be performed.

 <Calibration> Option button

Perform the X-XY compensation in the calibration mode and reflect the

result.

 <Measure> Option button

Perform the X-XY compensation in the measurement mode and do not

reflect the result. It is selected to measure the error for the Y axis.

 <Gantry> combo box

Gantry1: When performing calibration in Station F2 by using the calibration

tool.

Gantry2: When performing calibration in Station R2 by using the calibration

tool.

 <Axis> combo box

Select the axis to be compensated. Compensation can be made only for the X

axis.