SM411F_Service Manual.pdf - 第143页

Softwar e  If the following window appears, insert the enclosed installation CD and select the <Movable Media Search (Floppy Disc, CD-ROM….)> check box, then click the <Next> button to move to the following …

Software

2.2.2. Nexteye Image Graber (SAMC62) Installation

2.2.2.1. Hardware installation

○1 Female D-sub connector with 3 lines and 44 pins

○2 Male D-sub connector with 3 lines and 15 pins

○3 EEPROM for camera control logic

○4 EEPROM for board initialization

 Install the SAMC62 in the designated slot of the PBPI-6SA Backplane.

Take the board out from the protection envelope.

At this time, hold the edge of the board away from the gold plated

connector so that it may not be affected by static electricity.

Install the board in the empty PCI slot of the PC.

Tighten the screws to secure the board on the computer.

 Connect the prepared camera cable and board.

2.2.2.2. Driver installation

 The SAMC62 supports the Plug & Play. Therefore, once the PC is turned on

after installing the SAMC62, the following window appears and Windows

automatically recognizes the SAMC62t and begins to install it.

 Select the <Installation in the list or at specified place (high grade)> option

button, click the <Next> button and then move to the next step.

Software

 If the following window appears, insert the enclosed installation CD and select

the <Movable Media Search (Floppy Disc, CD-ROM….)> check box, then

click the <Next> button to move to the following step.

 The dialog box installing the SAMC62 appears.

Software

 If the Disc Insert Window appears, click the <OK> button and click the

<Search> button and then designate the driver folder in the CD-ROM.

 Once the driver installation is completed, click the <Close> button to finish the

installation.

Caution

After replacing the vision board, perform the light mapping

related to the fly camera and fix the camera by referring to

the 오류! 참조 원본을 찾을 수 없습니다. 오류! 참조 원

본을 찾을 수 없습니다. (page 오류! 책갈피가 정의되어

있지 않습니다.)

2.2.3. DP-RAM Board Installation

 Install the DP-RAM Board in the designated slot of the PBPI-6SA Backplane.

 If the PCI_IO_Driver_V2.exe Setup is executed, the driver is installed

automatically.