SM411F_Service Manual.pdf - 第152页
Electric Device 3.3. Control Rack Assembly 3.3.1. Required T ools Screw driver with “ + ” shaped tip and screw driver with “ - ” shaped tip T W rench or Hex W rench 3.3.2. PC Board Assembly Single Board Computer (S…
Software
Electric Device
3.3. Control Rack Assembly
3.3.1. Required Tools
Screw driver with “+” shaped tip and screw driver with “-” shaped tip
T Wrench or Hex Wrench
3.3.2. PC Board Assembly
Single Board Computer (SBC)
PCI I/O Board
Mono Camera Board
3.3.2.1. PC board assembly replacement procedure
1. Turn Off the PC in normal way. Then turn off the main switch on the front side
of the machine.
2. Remove the front cover of the machine using the “+” shape tipped screw driver.
Direction in which the
main switch is turned
off (counterclockwise)
Cover bolt positions (2
places)
Electric Device
3. Pull the control rack assembly holding its handle.
4. Remove the top cover of the control rack assembly.
5. If there is a cable connected to the board to be replaced, disconnect it.
6. Replace the board.
7. Clean the inside of the control rack assembly with a vacuum cleaner and
assemble it in the reverse order of disassembling.
PC Unit