SM411F_Service Manual.pdf - 第153页
Electric Device 3. Pull the control rack assembly holding its handle. 4. Remove the top cover of the control rack assembly . 5. If there is a cable connected to the board to be replaced, disconnect it. 6. Replace the boa…
Electric Device
3.3. Control Rack Assembly
3.3.1. Required Tools
Screw driver with “+” shaped tip and screw driver with “-” shaped tip
T Wrench or Hex Wrench
3.3.2. PC Board Assembly
Single Board Computer (SBC)
PCI I/O Board
Mono Camera Board
3.3.2.1. PC board assembly replacement procedure
1. Turn Off the PC in normal way. Then turn off the main switch on the front side
of the machine.
2. Remove the front cover of the machine using the “+” shape tipped screw driver.
Direction in which the
main switch is turned
off (counterclockwise)
Cover bolt positions (2
places)
Electric Device
3. Pull the control rack assembly holding its handle.
4. Remove the top cover of the control rack assembly.
5. If there is a cable connected to the board to be replaced, disconnect it.
6. Replace the board.
7. Clean the inside of the control rack assembly with a vacuum cleaner and
assemble it in the reverse order of disassembling.
PC Unit
Electric Device
8. Turn on the main switch of the machine to check if the machine operates
properly.
PC RACK 구성
PC 부 BOARD 순서
NEXTEYE IMAGE GARBBER #1,#2
PCI IO BOARD
SBC BOARD
VME RACK부 BOARD 순서
M3100 BOARD
CAN MASTER BOARD
VISION IF BOARD
VME IO BOARD
TWIN SERVO BOARD
X7043 SEDES BOARD
X7043 STEP CON. BOARD
MVME3100 BOARD
PC RACK CONFIGURATION
PC BOARD LIST
VME RACK BOARD LIST