D-serie LEVEL II.pdf - 第150页
C&P6/12 Placement Head Room for Your Sketches and Notes Determining the Zero Point Correction for the C&P Head Star Axis S tuden t Guide Advanced Level 2 SIPLACE D Series C&P6/12 Placement Head EN 05/2007 8-2…
C&P6/12 Placement Head
Determining the Zero Point Correction for the C&P Head Star Axis Room for Your Sketches and Notes
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 C&P6/12 Placement Head
8-23
8.7 Room for Your Sketches and Notes
C&P6/12 Placement Head
Room for Your Sketches and Notes Determining the Zero Point Correction for the C&P Head Star Axis
Student Guide Advanced Level 2 SIPLACE D Series
C&P6/12 Placement Head EN 05/2007
8-24
Component Handling
Overview
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Component Handling
9-1
9 Component Handling
9.1 Overview
This chapter describes the preparation of components with the component changeover tables, the
corresponding docking unit and the pneumatic cutter.
Up to four flexible changeover tables can be docked onto the D4/D3 (D1/D2: two) machine. The
changeover tables are automatically connected to/disconnected from the docking unit at the press of a
button. Plug-in electrical and pneumatic connections link the machine to the changeover table.
9-1: Positions of changeover tables and buttons for docking and undocking the tables (D4)
The table unit consists of the changeover table and the mechanics for raising and lowering the
changeover table.