D-serie LEVEL II.pdf - 第177页
Modular Conveyor Technical Data - Dual C onveyor Conveyor Settings S tude nt Guide Advanced Level 2 SIPLACE D Series EN 05/2007 Modular Conveyor 10-1 1 10.2.2 T echnical Dat a - Dual Conveyor 10.3 Conveyor Settings Type …
Modular Conveyor
Technical Data Overview of Flexible Dual Conveyor
Student Guide Advanced Level 2 SIPLACE D Series
Modular Conveyor EN 05/2007
10-10
10.1.19 Overview of Flexible Dual Conveyor
10.2 Technical Data
10.2.1 Technical Data - Single Conveyor
Legend
1. Dual conveyor "Standard", max. width 2 x 216
mm
2. Dual conveyor "Widened", max. width 2 x 242
mm
3. Dual conveyor "Widened" - "Standard", max.
width 1 x 380 mm
4. Dual conveyor "Extra wide", max. width 1
x 430 mm
5. Fixed conveyor side on right
6. Lane 1
7. Lane 2
8. Board
ATTENTION: Long board option
The long board stopper needs to be
removed when using a dual conveyor
for single lane operation!
Edge of fixed conveyor side Right (standard), left (optional)
Max. component height 6 mm for the C&P12
PCB format (LxW) 50mm x 50 mm up to 368 mm x 460 mm
Long board up to 610 mm (24"), (option)
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage upwards: 6 mm - board thickness
downwards: 0.3 mm + PCB thickness
Clearance on board underside max. 40 mm
PCB transport height 830 mm ±15 mm (Standard)
900 mm ±15 mm (Option)
930 mm±15 mm (Option)
950 mm ±15 mm (Option SMEMA height)
Modular Conveyor
Technical Data - Dual Conveyor Conveyor Settings
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Modular Conveyor
10-11
10.2.2 Technical Data - Dual Conveyor
10.3 Conveyor Settings
Type of interface SMEMA (Standard)
SIEMENS (Option)
PCB weight 3 kg
Component-free PCB handling edge 3mm
PCB changeover time 2.5 s
Ink spot recognition Possible
Automatic width adjustment Possible
Edge of fixed conveyor side Right (standard), left (optional)
Max. component height 6 mm for the C&P12
PCB format(LxW) 50mm x 50 mm up to 368 mm x 216 mm
2" x 2" to 18" x 8.5"
Long board up to 610 mm (24"), (option)
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage upwards: 6 mm - board thickness
downwards: 0.3 mm + PCB thickness
Clearance on board underside max. 40 mm
PCB transport height 830 mm ±15 mm (Standard)
900 mm ±15 mm (Option)
930 mm±15 mm (Option)
950 mm ±15 mm (Option SMEMA height)
Type of interface SMEMA (Standard)
SIEMENS (Option)
PCB weight 3 kg
Component-free PCB handling edge 3mm
PCB changeover time 2.5 s
Conveyor mode synchronous or asynchronous
Components on each conveyor same or different
PCB width on each conveyor same or different
Ink spot recognition synchronous: not possible, asynchronous:
Possible
Automatic width adjustment Possible
ATTENTION: Press the emergency stop button!
When setting the lifting table, make sure that the table is secured to prevent unauthorized
movement!
Modular Conveyor
Conveyor Settings Setting the Fixed Conveyor Side (Single and Dual Conveyor)
Student Guide Advanced Level 2 SIPLACE D Series
Modular Conveyor EN 05/2007
10-12
10.3.1 Setting the Fixed Conveyor Side (Single and Dual Conveyor)
10.3.1.1 General Notes
10-4: SITEST – conveyor "options and configuration"
See also:
J To (1): Reference Position of Fixed Side [J10-12]
J To (2), (3): Advanced Conveyor Configuration [J10-13]
J To (3): Widening the Conveyor (Flexible Dual Conveyor for Single Conveyor Mode) [J10-13]
J To (3): Converting the Single Conveyor Mode Back to Flexible Dual Conveyor Mode [J10-14]
J To (2): Setting the Fixed Conveyor Side for "Extra Wide" Mode [J10-15]
To (1): Reference Position of Fixed Side
The fixed conveyor side can be changed via SITEST and set to "Right side fixed"/"Left side fixed" as
required.
If the position of the fixed conveyor side which has been taught is saved, these values will be used
for the function
Move all conveyor edges to standard position
.
The default values will be overwritten and will need to be retaught.
If these dimensions are incorrectly set on the single or dual conveyor, the PCB reference corner may
be moved, leading to fiducial errors during placement.
NOTE:
In the SR/MC station SW, the fixed conveyor side of all lanes can be adjusted in the conveyor
firmware (flexible). However, this may only be set with the SITEST software.
NOTE:
If you want to change the conveyor mode from "widened" to "extra wide" (or vice versa), you
need to first move the conveyor back into standard mode and then select the new mode.
NOTE:
The menu (1) is protected with the Siemens Service password.