D-serie LEVEL II.pdf - 第32页

Overview Assemblies Sectors S tuden t Guide Advanced Level 2 SIPLACE D Series Overview EN 05/2007 3-8 3.4.2 Sectors Sector 1:  Transport con trol TSP 301  CAN interface CAN Bus baudrate 500 KBit/s for S tables  Assemb…

100%1 / 228
Overview
General Overview of Assemblies Assemblies
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Overview
3-7
3.4 Assemblies
3.4.1 General Overview of Assemblies
3-3: Overview of the modules
Legend
1 Machine frame 7 Extension kit on the PCB output side
2 PCB conveyor (flexible dual conveyor) 8 Gantry 3
3 Extension kit on the PCB input side 9 Monitor (2x)
4 Tape cutter , empty tape duct (4x) 10 Keyboard (2x)
5Gantry 1 11Gantry 4
6 Gantry 2
Overview
Assemblies Sectors
Student Guide Advanced Level 2 SIPLACE D Series
Overview EN 05/2007
3-8
3.4.2 Sectors
Sector 1:
Transport control TSP 301
CAN interface CAN Bus baudrate 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 1
Vision DC/DC converter illumination digital camera gantry 1 - 4 (03002280-02)
Terminal X100 power supply
Pneumatic switch for changeover table 1
Sector 2:
CAN I/O module 2 with CAN interface 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 2
2x fuse 24 V
Relay K1 station – compressed air shutoff
Terminal X200 power supply
Pneumatic switch for changeover table 2
Sector 3:
CAN interface CAN Bus baudrate 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 3
Terminal X300 power supply
Pneumatic switch for changeover table 1
Sector 4:
CAN I/O module 2 with CAN interface 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 4
2x fuse 24 V
Terminal X400 power supply
3-4: SIPLACE D4 sectors
Legend
1. Sector 1
2. Sector 2
3. Sector 3
4. Sector 4
5. Transport direction
Overview
Axis Unit and Computer Unit Assemblies
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Overview
3-9
Pneumatic switch for changeover table 1
3.4.3 Axis Unit and Computer Unit
Axis unit 1 – installation set on the PCB input side:
Servo board X, Y, star, Z, DP for PA1
3x Axis board A364
2x power supply 5V/15A, +/-15V
Computer unit
Box PC with CD-ROM drive (SR, SIPLACE Vision)
Micro Box PC (MC)
Multiplexer
USB hub
Axis unit 2 – installation set on the PCB output side:
Servo board X, Y, star, Z, DP for PA2
3x Axis board A364
2x power supply 5V/15A, +/-15V
Ballast circuit
3-5: Axis unit and computer unit
1. Sector 1
2. Sector 2
3. Sector 3
4. Sector 4
5. Transport direction
6. Axis unit 1
7. Computer Unit
8. Axis unit 2