D-serie LEVEL II.pdf - 第172页
Modular Conveyor Functions Single Conveyor - Design S tuden t Guide Advanced Level 2 SIPLACE D Series Modular Conveyor EN 05/2007 10-6 10.1.13 Single Conveyor - Design 10-1: PCB conveyor – single conveyor (D3/D4) Legend …
Modular Conveyor
Overview – Conveyor Systems in D-Series Functions
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Modular Conveyor
10-5
Lifting table
Clamping Upwards
Drive Pneumatic cylinder
Damper at top YES
Dual TSP lifting tables Can be coupled
PCB clamping length 368 mm Specified PCB clamping length 460 mm
Assembly D2 D1 3-part conveyor system
Conveyor control
TSP201 YES
Extension assembly for DT ---
SMEMA Option Can be switched via jumper and needs an
interface box and other cables between the
machines
Siemens PCB handling
interface
Standard
Conveyor (TSP) conversion
board
YES
Conveyor (TSP) side
conversion board
2 or 4 3 or 4
DIP switch, single conveyor 2, 4, 5 ON
1, 3, 6 OFF
2, 4 ON
1, 3, 5, 6 OFF
DIP switch (5) D2 must be set, DIP switch D1
does not need to be set, as on the label!
DIP switch, dual conveyor 1, 2, 4, 5 ON
3, 6 OFF
1, 2, 4 ON
3, 5, 6 OFF
Download eSW (firmware) 04
PCB recognition
Light barrier Transmitter red, left
PCB stop in PA Optical, LASER
Movement to LASER Time-controlled slow speed
Lifting table
Clamping Upwards
Drive Pneumatic cylinder
Damper at top YES
Dual TSP lifting tables Can be coupled
PCB clamping length 440 mm Specified PCB length: 460 mm
Assembly D4 D3 5-part conveyor system
Modular Conveyor
Functions Single Conveyor - Design
Student Guide Advanced Level 2 SIPLACE D Series
Modular Conveyor EN 05/2007
10-6
10.1.13 Single Conveyor - Design
10-1: PCB conveyor – single conveyor (D3/D4)
Legend
The single conveyor in the SIPLACE D3/D4 machines consists of the input conveyor, two placement
areas, the intermediate conveyor and the output conveyor. The conveyor has automatic width
adjustment and a lifting table to clamp the PCBs in place.
1 Input conveyor 5 Output conveyor
2 Placement area 1 6 Lifting table placement area 1
3 Intermediate conveyor 7 Lifting table placement area 2
4 Placement area 2 8 Assembly tub
Modular Conveyor
Dual Conveyor - Design Functions
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Modular Conveyor
10-7
10.1.14 Dual Conveyor - Design
10-2: PCB conveyor – dual conveyor (D3/D4)
Legend
The dual conveyor consists of two conveyor lanes. In the standard model, the fixed conveyor side is on
the right side of each lane.
1 Input conveyor 6 Lifting table placement area 2
2 Placement area 1 7 Assembly tub
3 Lifting table placement area 1 8 Output conveyor
4 Intermediate conveyor T1 Conveyor lane 1
5 Placement area 2 T2 Conveyor lane 2