D-serie LEVEL II.pdf - 第23页
Operational Safety Safety and signaling circuit Room for Your Sketches and Notes S tude nt Guide Advanced Level 2 SIPLACE D Series EN 05/2007 Operational Safety 2-7 2.6 Room for Y our Sketches and Notes
Operational Safety
ESD Guidelines Safety and signaling circuit
Student Guide Advanced Level 2 SIPLACE D Series
Operational Safety EN 05/2007
2-6
– 40 VDC operating voltage is switched to the component trolleys.
– 24 VDC operating voltage is switched to the empty tape cutters.
– The PCB conveyor control receives the enable signal for the PCB clamping, the PCB stopper
and the lifting table control.
The machine is then ready for use.
2.4.2.2 Safety Loops
2-4: Safety loops
2.5 ESD Guidelines
ATTENTION: See operating manual
The ESD guidelines apply for all work to and with the electronic assemblies of your own and the
training machine. For more details about the ESD guidelines, refer to the operating manual for
the relevant SIPLACE machine.
Operational Safety
Safety and signaling circuit Room for Your Sketches and Notes
Student Guide Advanced Level 2 SIPLACE D Series
EN 05/2007 Operational Safety
2-7
2.6 Room for Your Sketches and Notes
Operational Safety
Room for Your Sketches and Notes Safety and signaling circuit
Student Guide Advanced Level 2 SIPLACE D Series
Operational Safety EN 05/2007
2-8