SOM-1655-002.pdf - 第36页
35 Tg0742-PM-SO Fig. 16 "V . Bend T est" Window 10.2 "V . Bend T est" Window • • • • • Window Composition Head The component pick-up head is displayed. No. The registration No. for the T est ID is dis…
34 Tg0742-PM-SO
• Window Composition
*1 V. Bend Test
When this button is pressed, the "V. Bend Test" window (Fig. 16)
appears.
At this time, if the component recognition test has not been
performed yet, the "Component Recognition Test" dialog box
(Fig. 15) is indicated.
When the [OK] button is pressed, the "V. Bend Test" window
appears and the V. bend test can be performed.
Fig. 15 "Component Recognition Test" Dialog Box
0301-001
10.1 “Component Recog. Test” Tab
35 Tg0742-PM-SO
Fig. 16 "V. Bend Test" Window
10.2 "V. Bend Test" Window
••
••
• Window Composition
Head
The component pick-up head is displayed.
No.
The registration No. for the Test ID is displayed.
Test ID
The test ID is displayed.
Comment
The "Comment" for the test ID is displayed.
Result of Recog Test
The results of the component recognition test are displayed.
10.2 "V. Bend Test" Window
0301-001
36 Tg0742-PM-SO0301-001
[Scan Mode] Button
The scanning mode for measurement is set. When this button
is pressed, the following window appears.
10.2 "V. Bend Test" Window
Fig. 18 Scan Movement in Each Scan Mode
Fig. 17 "Scan Mode" Window