SOM-1655-002.pdf - 第43页

42 Tg0742-PM-SO 0301-001 1 1. Operation Mode Setting 1 1.1 Display Mode of V . Bend Result The settings are performed for displaying the V . bend detection result image on the V . bend detection unit monitor . • • • • • …

41 Tg0742-PM-SO0301-001

10.2 "V. Bend Test" Window

[Error Data] Button

When the detection result is decided as NG, the error data is

displayed.

When this button is pressed, the following window appears.

Fig. 22 "Error Data" Window

42 Tg0742-PM-SO0301-001

11. Operation Mode Setting

11.1 Display Mode of V. Bend Result

The settings are performed for displaying the V. bend detection

result image on the V. bend detection unit monitor.

••

• Sheet Layout

When the [Opn. Mode] tab in the "OPN. MODE" submenu window

and then the [Next] button are pressed, the following tab sheet

appears.

Display V. Bend Image

Disable : The V. bend image is not displayed on the monitor

in the V. bend detection unit.

Enable : The V. bend image is displayed on the monitor in

the V. bend detection unit.

Marking

Disable :The position of the detected lead is not displayed.

Enable :The position of the detected lead is displayed.

Marking Method

NG Lead : Only no good (NG) leads are marked in red.

All Lead : No good (NG) leads are marked in red and

good (OK) leads are marked in green.

11. Operation Mode Setting

Fig. 23 "Opn. Mode" Tab Sheet

43 Tg0742-PM-SO

Lead No.

Disable : Lead No. is not indicated.

Enable : Lead No. is indicated in blue, close to the detected

lead.

Marking of Ideal Point

Disable : The ideal lead position is not marked.

Enable : The ideal lead position, decided based on the

component shape, is marked in yellow.

11.2 Test Run Setting

••

• Sheet Layout

When the [Test Run] button is pressed in the "OPN. MODE" submenu

window, the following tab sheet appears.

Fig. 24 "Test Run" Tab Sheet

When the "V. Bend Detection Dsbl." is check marked in the check

box, the scanning for V. bend is performed in the test run. Then, when

the result is OK, the recognition disable mode can be set.

0301-001

11.2 Test Run Setting