SOM-1655-002.pdf - 第46页

45 Tg0742-PM-SO 12. V . Bend Detection Unit Offset The V . bend detection unit offset consists of [Insp Head Adj] (In- stalled Head Adjustment) and [Offset T eaching] functions. When the V . bend detection unit is instal…

44 Tg0742-PM-SO

11.3 Comp Carriage Dt Edit

••

• Sheet Layout

Press the [Comp Carriage Dt Edit] tab in the "RECOVERY" submenu

window and press the appropriate tab to select the feeder to be used.

When the [Screens */5] key is pressed to change it to [Screens 5/5],

the following tab sheet appears.

0301-001

11.3 Comp Carriage Dt Edit

• •

• Sheet Composition

*1 V. Bend DETN.

The V. bend detection function is set.

Enable : The V. bend detection function is used.

Disable : The V. bend detection function is not used.

*2 Sampling Scan Mode

The number of leads is set for V. bend detection.

Mode 1 (Sampling) :

The set number of leads in the component library is scanned

once.

All Check :

All the leads are scanned.

Fig. 25 "Comp Carriage Dt Edit" Tab Sheet

45 Tg0742-PM-SO

12. V. Bend Detection Unit Offset

The V. bend detection unit offset consists of [Insp Head Adj] (In-

stalled Head Adjustment) and [Offset Teaching] functions.

When the V. bend detection unit is installed, the adjustment for sen-

sor head attachment is first performed and the sensor head position

is arranged. Then, the offset teaching is started.

• Sheet Layout

When the [V. Bend Detection Unit] tab in the "TEACHING"

submenu window is pressed, the following tab sheet appears.

12. V. Bend Detection Unit Offset

0301-001

Fig. 26 "V. Bend Detection Unit" Tab Sheet

• Sheet Composition

[Insp Head Adj] Button

When this button is pressed, the window in Fig. 27 appears.

[Offset Teaching] Button

When this button is pressed, the window in Fig. 34 appears.

46 Tg0742-PM-SO

12.1 Adjustment for Sensor Head Installation

This window is used for the installation and adjustment of the

sensor head.

Normally, no operation is performed in this window.

12.1 Adjustment for Sensor Head Installation

0301-001

Fig. 27 "Insp Head Adj" Window

The operation of the adjustment for sensor head

installation function greatly affects the V. bend

detection accuracy. Therefore, only our service

personnel, or other persons accustomed to

teaching, should operate it.

WARNING