192277 - Micron Technical Reference Volume 3.pdf - 第151页
RISING TABLE MODULE - STYLE 2 TEST CYCLES Chapter Issue 3, Feb 18 Technical Reference Manual 28.9 TEST CYCLES For information on the T est Cycle functi on refer to the Screen Alignment Module chapter of this manual.
RISING TABLE MODULE - STYLE 2
CALIBRATIONS
28.8 Techncial Reference Manual Chapter Issue 3, Feb 18
The following window is displayed:
16. Select Confirm to save the new print height.
17. Select Cancel to close the Set Reference Vision Height window.
18. Select Exit.
19. Select Exit.
20. Select Back.
21. Carry out the Squeegee Reference Height calibration, Squeegee chapter
refers.
Please confirm the following:
The board clamps are not lifting the stencil.
When the part of the stencil that is over the board
clamps is pressed, there is no perceptible movement.
To adjust the elevation of the board clamps, press
Cancel. Use Incr. And Decr. to alter the value of print
height. Use Move to apply the current value of print
height.
Set Reference Vision Height
RISING TABLE MODULE - STYLE 2
TEST CYCLES
Chapter Issue 3, Feb 18 Technical Reference Manual 28.9
TEST CYCLES For information on the Test Cycle function refer to the Screen Alignment Module
chapter of this manual.
RISING TABLE MODULE - STYLE 2
TEST CYCLES
28.10 Techncial Reference Manual Chapter Issue 3, Feb 18