192277 - Micron Technical Reference Volume 3.pdf - 第259页
MAN MACHINE INTERFACE PROGRAMMABLE BEACON Chapter Issue 11, Jan 17 Technical Reference Manual 34.15 action selection page below . This action restores the default conditions to any category that is highlig hted as being …
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
34.14 Technical Reference Manual Chapter Issue 11, Jan 17
where the beacon representation is the same for each category.
Select Edit.
Select the (categories) for the conditions to apply.
On the previous page the category has been chosen - Operator Adjust; in the
example above, the ProFlow Kneading or ProFlow Paste Load beacon condi-
tion has been applied to it.
Restore Category
Defaults
Selecting the restore category defaults button on the Beacon page opens the
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
Chapter Issue 11, Jan 17 Technical Reference Manual 34.15
action selection page below.
This action restores the default conditions to any category that is highlighted as
being selected on the Beacon page.
NOTE
The restore default for categories which have been created is as shown below;
all indicators are OFF. The default condition for categories which have not been
created by the user are reset to the factory default condition for the category.
Figure 34-9 Category as Created
Figure 34-10 Category Restored
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
34.16 Technical Reference Manual Chapter Issue 11, Jan 17
Housekeeping Data files are stored in an.xml format; access to the files for viewing is via the
housekeeping functionality. Select the E:\Config folder.
Cancelling the
Buzzer
When the buzzer is active it can be de-activated by selecting the Cancel Buzzer
button on the top menu panel.