M8_ServiceManual_e.pdf - 第65页
3 Mechanical Section 3-25 X&Y Axis Ball Screw ; Recommended Grease Gun and Grease HH X&Y Axis Liner Guide; Recommended Grease Gun and Grease Grease Gun Set MG70 ( with the nozzle ) : THK ( LG0-M86A1-00X ) Recomme…
3 Mechanical Section
3-24
X Axis Liner Guide
Y Axis Liner Guide
Grease Nipple
Ball Screw Cove
r
Grease Gun & Nozzle
Grease Ni
pp
le
(
Lower
)
Grease Gun & Nozzle
3 Mechanical Section
3-25
X&Y Axis Ball Screw ; Recommended Grease Gun and Grease
HH
X&Y Axis Liner Guide; Recommended Grease Gun and Grease
Grease Gun Set MG70
(
with the nozzle
)
: THK
(
LG0-M86A1-00X
)
Recommended Nozzle
：
NSK HGP NZ3
（
LC8-M86A1-00X
）
φ
10-
φ
7 High Strength
Recommended Grease ; NSK Grease LR3 80g (K48-M3856-00X)
Recommended Nozzle ; NZ5 X Axis (LE4-M86A1-00X)
NSK HGP NZ５ Y Axis (LC8-M86A1-00X)
Grease Gun Set MG70 (with the nozzle) : THK (LG0-M86A1-00X)
Recommended Nozzle; H form
Recommended Grease： NSK Grease LR3 80g （K48-M3856-00X）
Recommended Nozzle : NSK HGP NZ3 (LC8-M86A1-00X)
Reference
Grease Gun Set MG70 (with nozzle)
：
THK LG0-M86A1-00X
Attached Special U Form Pipe and N Form Nozzle
φ6; Not recommended,
because of not enough
strength
3 Mechanical Section
3-26
■ Application of grease on a Nozzle Holder
ACTION:
① Rub the inside of the Nozzle Holder with materials like a dry cotton swab to clean out the grime, such
as old grease.
② Use the head vacuum breaker to blow out the dust, such as fibers from a cotton swab.
NOTE: The head vacuum breaker can be executed by clicking the button at required head on the window of Main
Menu > Manual Menu > Actuator > On/Off > Head Vacuum.
③ Apply silicon grease evenly on the new cotton swab and rub the inside of the Nozzle Holder softly and
evenly with it.
④ After grease is applied, insert a nozzle and confirm that the nozzle escaping works smoothly.
Cotton Swab
Nozzle holder