M8_ServiceManual_e.pdf - 第66页
3 Mechanical Section 3-26 ■ Application of grease on a Nozzle Holder ACTION: ① Rub the inside of the Nozzle Holder with materials like a dry cotton swab to cl ean out the grime, such as old grease. ② Use the head vacuum …
3 Mechanical Section
3-25
X&Y Axis Ball Screw ; Recommended Grease Gun and Grease
HH
X&Y Axis Liner Guide; Recommended Grease Gun and Grease
Grease Gun Set MG70
(
with the nozzle
)
: THK
(
LG0-M86A1-00X
)
Recommended Nozzle
：
NSK HGP NZ3
（
LC8-M86A1-00X
）
φ
10-
φ
7 High Strength
Recommended Grease ; NSK Grease LR3 80g (K48-M3856-00X)
Recommended Nozzle ; NZ5 X Axis (LE4-M86A1-00X)
NSK HGP NZ５ Y Axis (LC8-M86A1-00X)
Grease Gun Set MG70 (with the nozzle) : THK (LG0-M86A1-00X)
Recommended Nozzle; H form
Recommended Grease： NSK Grease LR3 80g （K48-M3856-00X）
Recommended Nozzle : NSK HGP NZ3 (LC8-M86A1-00X)
Reference
Grease Gun Set MG70 (with nozzle)
：
THK LG0-M86A1-00X
Attached Special U Form Pipe and N Form Nozzle
φ6; Not recommended,
because of not enough
strength
3 Mechanical Section
3-26
■ Application of grease on a Nozzle Holder
ACTION:
① Rub the inside of the Nozzle Holder with materials like a dry cotton swab to clean out the grime, such
as old grease.
② Use the head vacuum breaker to blow out the dust, such as fibers from a cotton swab.
NOTE: The head vacuum breaker can be executed by clicking the button at required head on the window of Main
Menu > Manual Menu > Actuator > On/Off > Head Vacuum.
③ Apply silicon grease evenly on the new cotton swab and rub the inside of the Nozzle Holder softly and
evenly with it.
④ After grease is applied, insert a nozzle and confirm that the nozzle escaping works smoothly.
Cotton Swab
Nozzle holder
3 Mechanical Section
3-27
Specified Lubricants
PART PART NO. GREASE NAME MANUFACTURER
X/Y Axis
Ball screw & LM Guide
K48-M3856-00X GREASE NSK
Silicone Grease
(for Nozzles)
LG0-M89AB-00X GREASE,SILICON Three Bond (#1855)
■Grease Gun
Part Name
Part No. Remark
GUN, GREASE W/NOZZLE LG0-M86A1-00X Grease Gun with nozzle
※1 NOZZLE LC8-M86A1-00X X/Y LM Guide Recommended Nozzle
※2 NOZZLE LE4-M86A1-00X X Axis Ball Screw Recommended Nozzle
※1 Higher Strength Nozzle LC8-M86A1-00X is recommended for XY LM Guide.
※2 Flexible Nozzle LE4-M86A1-00X is recommended for X Axis Ball Screw.
NOTE: AFA grease is superior to AFB grease and can be used for all the axes.
NOTE: Order placement for lubricants can be accepted only if the machine is delivered inside Japan. For locations
overseas, please consultant the agency where you purchased the machine.
NOTE: Please specify Part No.
to place an order.