00191369-02.pdf - 第122页
3 Introduction and Basic Concepts User Manual HS-50 3.3 User Interface - Views and Menus Software Version S R.501.xx 12 /99 Issue US 122 t I I t Å Cli ck the m enu ite m Access level ... The "Acces s level " di…
User Manual HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx 12/99 Issue US 3.3 User Interface - Views and Menus
121
t IIt
NOTE
At "Operator" access level, it is only possible to activate and deactivate the conveyor interface op-
tions. 3
Å If you want to activate or deactivate the options for a processing area or view its configuration,
click the Processing area 1 or Processing area 2 tab to select the required area.
The display switches to the selected processing area (see example below for PA1).
3
Å Check/uncheck the boxes corresponding to the required machine options.
Å Click Accept to save the settings.
Access level... 3
It is possible to protect some user interface functions against unauthorized use by setting an ac-
cess level and allocating a password. Functions which are not accessible from a given access
level cannot be executed since the associated pushbuttons, radio buttons and menu commands
are either inactive or not displayed. 3
You can choose between the access levels "Operator", "Line engineer" and "Service". Passwords
can be allocated for the access levels "Line engineer" and "Service". 3
3 Introduction and Basic Concepts User Manual HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx 12/99 Issue US
122
t IIt
Å Click the menu item Access level ...
The "Access level" dialog box is opened.
3
Å Click the radio button for the required access level.
Å Click the "Change password" button to the right of the access level if you want to allocate a
password or change an existing password.
The dialog box for password entry is now displayed.
Example of initial password allocation 3
3
Å Click the "New password" text box and enter the required password.
Å Click the "Confirm password" text box and re-enter the password.
Å Click the OK button to confirm the password.
User Manual HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx 12/99 Issue US 3.3 User Interface - Views and Menus
123
t IIt
Example for the modification of an existing password 3
3
Å Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Å Click the "New password" text box and enter the new password.
Å Click the "Confirm password" text box and re-enter the new password.
Å Click the OK button to confirm the password.
Å Click OK to close the "Access level" dialog box.
Control mode... 3
The control mode determines how the station is supplied with the necessary placement data. 3
Å Click the menu item Control mode...
The "Control mode" dialog box is displayed.
3