00191369-02.pdf - 第388页
11 Station extensions / hardware User Manual HS -50 11.2 Component barcode Software Version SR.501.xx 12/99 Issue US 388 t I I t Track alloc ation 11 Four-dig it barco de stri ps are attached to the l ateral s afety sc r…
User Manual HS-50 11 Station extensions / hardware
Software Version SR.501.xx 12/99 Issue US 11.2 Component barcode
387
t IIt
11.2 Component barcode
11.2.1 General
With the HS-50 placement system, a barcode reader can be used to check that the track allocation
is correct and to read component data from component reels. A barcode reader is attached to both
of the operating panels on the placement system. 11
11
Fig. 11.2 - 1 Component barcode reader
Key to Fig. 11.2 - 1
(1) Barcode reader
(2) Operating panel, right
(3) Operating panel, left
T PCB transport direction 11
11 Station extensions / hardware User Manual HS-50
11.2 Component barcode Software Version SR.501.xx 12/99 Issue US
388
t IIt
Track allocation 11
Four-digit barcode strips are attached to the lateral safety screens for the purposes of track allo-
cation. The first digit is used to identify the component table (1, 2, 3 or 4), while the remaining three
digits specify the track number. There are also return barcodes at both ends of the barcode strip.
The barcode strips are numbered consecutively in intervals of two (1, 3, 5, 7...) and each repre-
sents 2 tracks (barcode 1 = track 1 and 2). 11
Components 11
Data can be read from the component reels to compare the stock of components against the
quantity specified in the set-up file (refill check), for example. 11
An audible signal is given when each dataset has been read successfully. 11
PLEASE NOTE 11
The component barcode reader option must be configured on the line computer.
Barcodes that start with the number 1, 2, 3 or 4 and are four digits long are interpreted as track
barcodes. All other barcodes that do not start with number 1, 2, 3 or 4 are regarded as compo-
nent barcodes.
User Manual HS-50 11 Station extensions / hardware
Software Version SR.501.xx 12/99 Issue US 11.2 Component barcode
389
t IIt
11.2.2 Notes on operation
– The barcode reader must connected.
– The barcode for each component must entered on the line computer.
Å To do this, select the "Set-up check with barcode" function from the Machine options menu.
11
Fig. 11.2 - 2 Set-up check with barcode
PLEASE NOTE: 11
If one of the digits of the barcode has been assigned to a filter (i.e. a star *), this digit will not be
evaluated. This enables data contained in the barcode, such as the date or company name, to be
skipped.
– If the component barcode has been activated on the line computer and "Set-up check with bar-
code" has been selected from the machine options on the station, the "Fill location" and "Fill
track with barcode" functions cannot be used manually.
– If there are tracks with components without a barcode, then a manual "Fill" is possible, even if
the refill check has been activated.