00191369-02.pdf - 第372页
10 Component handling User Manual HS-50 10.4 T ape c ontainer Software Version SR.501.xx 12/99 Issue U S 372 t I I t 10.4 T ape cont ainer 10. 4.1 Ov ervi ew Reels up to 1 5" in diamete r m ay be used, althou gh for…
User Manual HS-50 10 Component handling
Software Version SR.501.xx 12/99 Issue US 10.3 Setting up the feeder modules
371
t IIt
10
Fig. 10.3 - 1 Inserting 30 or 45 mm wide feeder modules on the component table
Key to Fig. 10.3 - 1
(1) Feeder module, 30 mm wide
(2) Feeder module, 45 mm wide
(3) Feeder module, 30 mm wide
10 Component handling User Manual HS-50
10.4 Tape container Software Version SR.501.xx 12/99 Issue US
372
t IIt
10.4 Tape container
10.4.1 Overview
Reels up to 15" in diameter may be used, although for 15" reels you should use spindles as well.
Insert the spindles into the partitions as shown in Fig. 10.4 - 1
. 10
PLEASE NOTE 10
We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that
the feeder modules operate reliably.
Fig. 10.4 - 1 Component table and tape container
(1) Component table (2) Spindle position for 15" reels
(3) Waste tape container (4) Partition
(5) Tape container (6) Spindles
