00191369-02.pdf - 第375页
User Manual HS-50 10 Component handling Software V ersion SR.501.xx 12/99 Issue US 10.5 Used tape cut ter 375 t I I t 10.5.2 Feeding the used tape to the cutte r Fig. 10.5 - 3 Feeding the used tape to the cu tter Key to …
10 Component handling User Manual HS-50
10.5 Used tape cutter Software Version SR.501.xx 12/99 Issue US
374
t IIt
10.5.1 General
The placement system has a used tape cutter at each of the four component table locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component table. 10
Å Empty the waste tape container every day.
Fig. 10.5 - 2 Used tape cutter
Key to Fig. 10.5 - 2
(1) Pneumatic cutting device
(2) Short-stroke lifting cylinder
(3) Opening for removal of the used tape
User Manual HS-50 10 Component handling
Software Version SR.501.xx 12/99 Issue US 10.5 Used tape cutter
375
t IIt
10.5.2 Feeding the used tape to the cutter
Fig. 10.5 - 3 Feeding the used tape to the cutter
Key to Fig. 10.5 - 3
(1) Used tape guide channel
(2) Channel for removal of the used tape
(3) Tape cutter
(4) Waste tape chute
10 Component handling User Manual HS-50
10.5 Used tape cutter Software Version SR.501.xx 12/99 Issue US
376
t IIt
The used tape guide channels (see item 1 in Fig. 10.5 - 3) are located upstream of the feeder mod-
ules. They are positioned directly above the used tape cutters (see item 3 in Fig. 10.5 - 3
). 10
The tape is automatically guided through the used tape guide channel into the used tape cutter
below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape
then passes via the waste tape chute (see item 4 in Fig. 10.5 - 3
) into the component table’s waste
container. 10
10
Fig. 10.5 - 4 Removable waste tape container in the component changeover table
Key to Fig. 10.5 - 4
(1) Component changeover table
(2) Removable waste tape container
10