OM-1606-006w_GT-28x.pdf - 第13页
OM-1606 Safe-7 3. Alert Indications in Instruction Manual 0908-001 3. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manu…
OM-1606
Safe-6
Notes on Maintenance
Only trained personnel should perform maintenance of the tape feeders, both
carefully and in accordance with the procedures specied.
0908-001
2. Common Precautionary Items
Safety Precautions
OM-1606
Safe-7
3. Alert Indications in Instruction Manual
0908-001
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as "
CAUTION
"
Alert Description Pages
•
When the bank feeder change cart is to be moved, hold the
handle and move it.
•
When setting the handle slider, take care that your nger is not
pressed down by the handle slider.
3.
•
When the bank feeder change cart is to be moved, take care
that the cart does not hit your foot.
•
When the bank feeder change cart is operated, wear shoes
protecting your toes or with a bottom thickness of 10 mm or
more.
3.
Do not drop the tape feeder, when attaching or detaching.
Some tape feeder models are rather heavy.
In the case that the feeder is removed with one hand, your hand might
not be able to support the feeder weight when it is removed from the
base, which might cause a fall of the feeder.
Falling of a tape feeder might cause an injury on your feet or damage to
the feeder.
Hold such feeder with your both hands one by one and take care not to
drop it.
3.1
3.2
Safety Precautions
OM-1606
Safe-80908-001
3. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Pages
•
The cutter blade in the tape cutting jig is very sharp, take the
greatest care not to get injured.
Also, take care not to catch your nger in the spring section.
•
When the tape is to be cut off by using the tape cutting jig, set
the tape on the pilot pins and hold it securely with your thumb
and the forenger; then cut off the tape slowly and carefully so
as not to cut your nger.
•
When the tape cutting jig is not to be used, lock it with the lock
lever while the cutter blade is closed, and keep it in a specied
place.
•
If, because of a chip on the cutter blade in the tape cutting jig, the
tape cannot be cut easily, unusually strong force is required to cut off
the tape, which may cause personal injury.
In such a case, purchase a new tape cutting jig.
6.4
Cut it off with the greatest care so as not to cut your nger. 6.5.1
6.6.1
6.7.1
6.8.1
6.9.1
6.10.1
Only trained persons should perform maintenance, both carefully
and according to the specied procedures.
7.1
Safety Precautions