OM-1606-006w_GT-28x.pdf - 第47页
OM-1606 2. Attachment and Detachment of T ape 2-15 (4) Lift the suppressor and remove the cover tape in the horizontal direction from the peeling section. Notice Do not remove the cover tape forcibly pulling it. If the c…
OM-1606
2-14
2. Attachment and Detachment of Tape
2.3 Detachment of Paper or Embossed Tape
Procedure
(1) Take out the cover tape from the cover tape housing section.
Cover Tape Housing Section
FB16
Reference
Refer to "2.4 Remove the Cover Tape" for details.
(2) Press down the cover tape take-up release lever and remove the cover tape.
Cover Tape
Cover Tape Take-up Release Lever
FB17
(3) While gently pressing the end of the suppressor with your nger, press the
lower side of the end hook to lift the suppressor.
1005-002
OM-1606
2. Attachment and Detachment of Tape
2-15
(4) Lift the suppressor and remove the cover tape in the horizontal direction
from the peeling section.
Notice
Do not remove the cover tape forcibly pulling it.
If the cover tape is deformed and passes through the peeling
section, then the peeling section might become deformed, causing
a pick-up error.
Remove horizontal direction
Cover Tape
Suppressor Top View FB18
(5) Turn the tape reel and take-up the tape on the tape reel.
Notice
If the tape is taken up while the cover tape is left on the peeling
section, the peeling section might become deformed, causing a
pick-up error.
0908-001
OM-1606
2-16
2. Attachment and Detachment of Tape
2.4 Remove the Cover Tape
The amount of housing in the cover tape housing section is as much as about one
and half small reels. Whenever the tape is to be replaced, or spliced, remove the
cover tape from the cover tape housing section.
Notice
When the cover tape housing section is lled with the cover tape and no
more tape can be pressed in, the roll-in gear will be locked, which might
cause malfunction of or damage to the tape feeder.
Procedure
(1) Open the cover tape outlet cover and pull the cover tape from the cover tape
housing section.
Roll-in Gear
Cover Tape
Cover Tape Outlet Cover
[1] Open the cover tape outlet cover.
[2] Pull the cover tape in the direction of the arrow.
FB19
1005-002