OM-1606-006w_GT-28x.pdf - 第97页

OM-1606 5-1 5. Component Pick-up Position Alignment 0908-001 5. Component Pick-up Position Alignment To pick up a component correctly, the component center is aligned with the pick- up position. The component center set …

OM-1606

4-18

4. Operation Panel

0908-001

OM-1606

5-1

5. Component Pick-up Position Alignment

0908-001

5. Component Pick-up Position Alignment

To pick up a component correctly, the component center is aligned with the pick-

up position.

The component center set position is marked on the suppressor.

Also, the pick-up position varies with the pitch of the feed.

Notice

If the component center is not aligned with the pick-up position, then the

pick-up cannot proceed correctly.

Reference

Refer to "4.2.4 Minimum Pitch Feed Operation" for the tape feeding operation.

Suppressor

FE1

OM-1606

5-2

5. Component Pick-up Position Alignment

Direction of Feed

GD-28081

Direction of Feed

GD-28083

Pick-up Position

Pick-up Position (Only for 2 mm pitch)

Pick-up Position (Only for 8 mm pitch)

Pick-up Position

Pick-up Position (Only for 2 mm pitch)

Pick-up Position

Direction of Feed

GT-28080, GD-28080

Direction of Feed

GT-28082, GD-28082

Pick-up Position at 4 mm pitch

Pick-up Position

Pick-up Position at 2 mm pitch

FE2

0908-001