OM-1606-006w_GT-28x.pdf - 第71页
OM-1606 3. T ape Feeder Attachment and Detachment Procedures 3-1 1005-002 3. T ape Feeder Attachment and Detachment Procedures Notice Before setting the tape feeder onto the bank feeder change cart, follow the instructio…
OM-1606
2-38
2. Attachment and Detachment of Tape
1009-002
•
Adjusting Procedure
Procedure
(1) Loosen the hexagon nut.
(2) Turn the groove on the adjusting bolt ve times clockwise using a
screwdriver.
(When the bolt is turned around ve times from the standard position, the
gap distance between the ange and hexagon nut becomes "1.7 mm" and the
tape take-up strength becomes 1.4 times more of the standard strength.
(3) Return the hexagon nut to the upper surface position and x.
OM-1606
3. Tape Feeder Attachment and Detachment Procedures
3-11005-002
3. Tape Feeder Attachment and Detachment
Procedures
Notice
Before setting the tape feeder onto the bank feeder change cart, follow
the instructions below.
•
Lock the caster brake (2 locations) of the bank feeder change cart.
•
If the tape feeder rises, it might cause breakdown to the pick-up nozzle
or machine (SIGMA-G4/G5) or pick-up error.
Set the tape feeder correctly.
•
After the suppressor has been moved up and down, for tape setting
or replacement, make sure that the tape feeder front hook is securely
caught, and that the suppressor does not rise.
With the dual tape feeder, make sure that the suppressor on the other
side does not rise either.
•
Make sure that the cover tape is not caught at the peeling section on
the suppressor.
•
Make sure that the excess tape section is appropriate (5 to 10 mm)
and that the tape end is not folded.
•
Make sure that the cover tape passes correctly onto the roller section
and that it has been inserted into the cover tape housing section.
Also, make sure that there is no sag in the cover tape.
CAUTION
•
When the bank feeder change cart is to be
moved, hold the handle and move it.
•
When setting the handle slider, take care that your
nger is not pressed down by the handle slider.
•
When the bank feeder change cart is to be
moved, take care that the cart does not hit your
foot.
•
When the bank feeder change cart is operated,
wear shoes protecting your toes or with a bottom
thickness of 10 mm or more.
OM-1606
3-2
3. Tape Feeder Attachment and Detachment Procedures
3.1 Tape Feeder Attachment Procedure
CAUTION
Do not drop the tape feeder, when attaching or
detaching.
Some tape feeder models are rather heavy.
In the case that the feeder is removed with one hand, your
hand might not be able to support the feeder weight when
it is removed from the base, which might cause a fall of
the feeder.
Falling of a tape feeder might cause an injury on your feet
or damage to the feeder.
Hold such feeder with your both hands one by one and
take care not to drop it.
Procedure
(1) Set the reel onto the reel receiving bay in the reel holding section on the bank
feeder change cart.
Reel Holding Section
FC1
0908-001