OM-1606-006w_GT-28x.pdf - 第40页

OM-1606 2-8 2. Attachment and Detachment of T ape (1 1) Maintain the suppressor being lowered: press the upper section of the front hook to x the suppressor . Fix the suppressor with the front hook. Front Hook FB11 NOTI…

100%1 / 235
OM-1606
2. Attachment and Detachment of Tape
2-7
(7) Set the carrier tape in the chute section so that the sprocket pins are securely
engaged with the sprocket holes.
(8) Make sure that components are not scattered on the carrier tape.
(9) Lower the suppressor carefully.
Push down the suppressor so that it does not mount on the chute.
(10) Make sure that the cover tape or chip component is not caught in the peeling
section.
Notice
If the cover tape or the chip component gets caught by the suppressor,
then the peeling section might be deformed or a pick-up error occur.
If there is any such catching of the cover tape or chip component, do not
pull it out forcibly; just lift the suppressor.
If operation is performed with the
cover tape caught in the
suppressor . . .
The peeling section might be
deformed.
If the suppressor is lowered with
any foreign substance on the tape
surface . . .
The peeling section might be
deformed.
Deformation
Cover Tape
Suppressor
Foreign Substance
Deformation
FB10
0908-001
OM-1606
2-8
2. Attachment and Detachment of Tape
(11) Maintain the suppressor being lowered: press the upper section of the front
hook to x the suppressor.
Fix the suppressor with the front hook.
Front Hook
FB11
NOTICE
Securely lock the suppressor with the front hook.
If the tape feeder is operated while the suppressor
is raised, the machine (SIGMA-G4/G5) might be
damaged or incur a pick-up error.
1005-002
OM-1606
2. Attachment and Detachment of Tape
2-9
(12) Use scissors to cut the tape, so that the excess tape section is 5 to 10 mm.
Notice
Use scissors which would not cut ngers, and cut the tape one by
one.
Tape
5 to 10 mm
FB12
With wide embossed tape, avoid the embossed section when cutting the tape.
Cut it here.
FB13
Notice
When the tape is cut, do not fold the end section.
The tape might not be cut correctly by using the cutter attached to
the machine (SIGMA-G4/G5).
Folding
FB14
1005-002