OM-1606-006w_GT-28x.pdf - 第59页

OM-1606 2. Attachment and Detachment of T ape 2-27 (2) Remove the set screw (round head screw) attached onto the set screw housing section, and attach it onto the tape guide. Then, adjust the tape guide width based on th…

OM-1606

2-26

2. Attachment and Detachment of Tape

•

For using tape with 24 mm width

Procedure

(1) Remove the set screw (countersunk head screw), and attach it onto the set

screw housing section.

Set Screw

(Countersunk Head Screw)

Set Screw

(Countersunk Head Screw)

Set Screw housing section

Housing

FB33

0908-001

OM-1606

2. Attachment and Detachment of Tape

2-27

(2) Remove the set screw (round head screw) attached onto the set screw

housing section, and attach it onto the tape guide. Then, adjust the tape guide

width based on the emboss pocket width.

Reference

Refer to "2.5.1 Description of Tape Guide" for the tape guide attachment

procedure.

Tape Guide

Set Screw

(Round Head Screw)

Set Screw

(Round Head Screw)

Set Screw housing section

FB34

Note

For a 32 mm width tape, the tape guide is not available.

When a 32 mm width tape is to be used, make sure to remove the tape

guide.

1005-002

OM-1606

2-28

2. Attachment and Detachment of Tape

2.6 Joint Detection Unit

In the case of tape feeders GD-28080, GD-28081, GD-28082, GD-28083,

GD-12162, GD-24322, GD-44562, GD-72002 and GD-88002 with Joint detection

units, pass the tape through the joint detection unit.

Procedure

(1) Bend the cover tape at the end of the tape and pass the tape according to the

tape guide from under the joint detection unit.

Pass the tape from

the lower side

Bend the cover tape at the end of tape

Tape guide

GD-28080, GD-28081, GD-28082, GD-28083 Joint Detection Unit FB35

Note

If a 16 mm width tape in GD-12162, 32 mm width tape in GD-24322 and 56

mm width tape in GD-44562 is to be attached, it is necessary to move the tape

guide of the joint detection unit.

Move the tape guide

Tape Guide Set Screw

Tape Guide

Move the tape guide

Tape Guide Set Screw

Tape Guide

GD-12162 Joint Detection Unit FB36 GD-24322, GD-44562, (Illustration of GD-24322)

Joint Detection Unit FB37

1011-003