OM-1606-006w_GT-28x.pdf - 第53页

OM-1606 2. Attachment and Detachment of T ape 2-21 (2) Loosen the set screw (countersunk head screw) to remove the tape guide and attach the tape guide onto the support suppressor housing section. Set Screw (Countersunk …

100%1 / 235
OM-1606
2-20
2. Attachment and Detachment of Tape
2.5.2 Preparation before using 16 mm, 32 mm, 56 mm width tape
If a 16 mm width tape in GT-12162 and GD-12162 or a 32 mm width tape in
GT-24322 and GD-24322 is to be used, then a tape guide and support suppressor
detachments are required.
Also, if a 56 mm width tape in GT-44562 or GD-44562 is to be used, the support
suppressor and component drop preventive cover removals and tape guide
movement are required.
•
For using tape with 16 mm width
Procedure
(1) Loosen the set screw (round head screw) with a precision screw driver to
remove the support suppressor, and then attach it onto the support suppressor
housing section.
Support Suppressor
Support Suppressor
Set Screw
(Round Head Screw)
Set Screw
(Round Head Screw)
Support Suppressor
housing section
Housing
FB23
1005-002
OM-1606
2. Attachment and Detachment of Tape
2-21
(2) Loosen the set screw (countersunk head screw) to remove the tape guide and
attach the tape guide onto the support suppressor housing section.
Set Screw
(Countersunk Head Screw)
Support Suppressor
housing section
Housing
Set Screw
(Countersunk Head Screw)
Tape Guide
FB24
•
For using tape with 32 mm width
Procedure
(1) Loosen the set screw (round head screw) with a precision screw driver to
remove the support suppressor.
Support Suppressor
Set Screw
(Round Head Screw)
FB25
0908-001
OM-1606
2-22
2. Attachment and Detachment of Tape
(2) Loosen the set screw (countersunk head screw) to remove the tape guide and
attach the support suppressor removed in step (1), onto the tape guide. Then,
attach the set screw (countersunk head screw) onto the set screw housing
section.
Set Screw
(Countersunk Head Screw)
Set Screw housing section
Housing
Tape Guide
Set Screw
(Countersunk Head Screw)
Support Suppressor
Tape Guide
Set Screw
(Round Head Screw)
FB26
(5) Remove the set screw (round head screw) from the set screw housing section
and attach the tape guide where the support suppressor has been already
attached, onto the tape guide housing section.
Tape Guide
Set Screw housing section
Set Screw
(Round Head Screw)
Set Screw
(Round Head Screw)
FB27
0908-001