5OM-1011-002.pdf - 第24页

Tg0861-PM-MD 1. Adjustment of P .C.B. Positioning Section • The direction of the P .C.B. stopper block is adjusted in compliance with the setting upon shipment of the machine. When setting is changed, it is required to c…

0305-001 2-B Tg0861-PM-MD

Tg0861-PM-MD

1. Adjustment of P.C.B. Positioning Section

• The direction of the P.C.B. stopper block is adjusted in compliance with the

setting upon shipment of the machine.

When setting is changed, it is required to change the direction of the P.C.B.

stopper block according to the changed setting.

• See the figures depicted in “6.3 P.C.B. Transfer in Volume 1” for the direc-

tion of the P.C.B. stopper block.

Procedure for Direction Change of Stopper Block

(1) Move up the P.C.B. stopper and shut off the power supply.

(2) Hold the cylinder rod with a wrench and remove the bolt fastening the

stopper block.

(3) Change the direction of the stopper block by 180° and insert it into the

cylinder rod.

(4) Hold the cylinder rod with a wrench and tighten the bolt fastening the

stopper block.

1. Adjustment of P.C.B. Positioning Section

0305-001 2-1

Wrench (10 mm)

Hexagon Wrench (for M5)

Cylinder Rod

Tighten

Loosen

CAUTION

Hold the cylinder rod with a wrench such that 

the cylinder rod does not rotate.

Otherwise, the P.C.B. stopper may be broken.

Fig. 5B1

Fig. 5B2

Tg0861-PM-MD

(5) Turn on the power and move down the P.C.B. stopper.

0305-001 2-2

1. Adjustment of P.C.B. Positioning Section

Fig. 5B3