MDO3000 Programmer Manual.pdf - 第1127页

Appendix G: Application Module-enabled Commands Application M o dule Commands DPO4USB, MDO3USB TRIGger:A:BUS:B<x>:USB:QUALi fi er TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber TRIGger:A:B US:B<x>:USB:SPECIAL T y…

100%1 / 1158
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4USB,
MDO3USB
USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for l ow-speed,
full-speed, and high-speed USB s erial buses. Also enables analytical tools such as digital views of the
signal, bus vi
ews, packet decoding, search tools, and packet decode tables with time-stamp information for
low-speed, full-speed, and high-speed USB serial buses.
BUS:B<x>:USB:BITRate
BUS:B<x>:USB:PRObe
BUS:B<x>:U
SB:SOUrce:DIFFerential
BUS:B<x>:USB:SOUrce:DMINus
BUS:B<x>:USB:SOUrce:DPLUs
SEARCH:SE
ARCH<x>:TRIGger:A:BUS:B<x>:USB:ADDRess:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ADDRess:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:OFFSet
SEARCH:SEARCH<x>:TR IGger:A:BU S:B<x>:U SB:D ATa:SIZe
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:TYP e
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ENDPoint:VALue
SEARCH:
SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ERRTYPE
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:HANDSHAKEType
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:QUALifier
SEARCH
:SEARCH<x>:TRIGger:A:BU S:B <x>:USB:SO FFRAMENUMber
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
SEARC
H:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:HUB:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:PORT:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:SC:VALue
SEARC
H:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:SE:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:TOKENType
TRIGger:A:BUS:B<x>:USB:ADDRess:HIVALue
TRIG
ger:A:BUS:B<x>:USB:ADDRess:VALue
TRIGger:A:BUS:B<x>:USB:CON D ition
TRIGger:A:BUS:B<x>:USB:DATa:HIVALue
TRI
Gger:A:BUS:B<x>:USB:DATa:OFFSet
TRIGger:A:BUS:B<x>:USB:DATa:SIZe
TRIGger:A:BUS:B<x>:USB:DATa:TYPe
TRI
Gger:A:BUS:B<x>:USB:DATa:VALue
TRIGger:A:BUS:B<x>:USB:ENDPoint:VALue
TRIGger:A:BUS:B<x>:USB:ERRTYPE
TR
IGger:A:BUS:B<x>:USB:HANDSHAKEType
G-18 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Appendix G: Application Module-enabled Commands
Application M o
dule
Commands
DPO4USB,
MDO3USB
TRIGger:A:BUS:B<x>:USB:QUALifier
TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber
TRIGger:A:B
US:B<x>:USB:SPECIALType
TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:HUB:VALue
TRIGger:A:
BUS:B<x>:USB:SPLit:PORT:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:SC:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:SE:VALue
TRIGger:A:
BUS:B<x>:USB:TOKENType
DPO4VID HDTV and Custom (nonstandard) Video Triggering Module. Not necessary for MDO3000 series as these
features come standard.
TRIGger:A:VIDeo:CUSTom{:FORMat|:TYPe}
TRIGger:
A:VIDeo:CUSTom:LINEPeriod
TRIGger:A:VIDeo:CUSTom:SYNCInterval
TRIGger:A:VIDeo:STANdard (The application module enables the arguments for HDTV and custom
(nonsta
ndard) to be used with this command.)
VIDPic:AUTOContrast
VIDPic:AUTOContrast:UPDATERate
VIDPic
:BRIGHTNess
VIDPic:CONTRast
VIDPic:DISplay
VIDPic
:FRAMETYP e
VIDPic:LOCation:HEIght
VIDPic:LOCation:OFFSet
VIDPi
c:LOCation:STARt:LINE
VIDPic:LOCation:STARt:PIXel
VIDPic:LOCation:WIDth
VIDP
ic:LOCation:X
VIDPic:LOCation:Y
VIDPic:SOUrce
VID
Pic:STANdard
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-19
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
MDO4TRIG
Advanced RF Po
wer Level Triggering Module. Enables the power level on the RF input to be used as a
source in the following trigger types: Pulse Width, Runt, Timeout, Logic, and Sequence.
TRIGger:A:LOGIc:CLAss *
TRIGger:A:LOGIc:INPut:CLOC k:SOUrce *
TRIGger:A:L
OGIc:INPut:RF
TRIGger:A:LOGIc:THReshold:RF
TRIGger:A:LOWerthreshold:RF
TRIGger:A:
PULSEWidth:SOUrce*
TRIGger:A:RUNT:SOUrce*
TRIGger:A:TIMEOut:SOUrce*
TRIGger:A
:UPPerthreshold:RF
TRIGger:B:EDGE:SOUrce*
* The application module enables the RF argument for this command.
G-20 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual