MDO3000 Programmer Manual.pdf - 第569页

Commands Listed in Alphabetical Order As e r i e so fe x a m ples showing how to use mask commands for typical tasks is included in an appendix. (See page E-1, Mask/Limit Command Seq uence Examples .) Conditions This com…

100%1 / 1158
Commands Listed in Alphabetical Order
Arguments
<Block> is a blo
ck containing up to 300 ASCII characters.
<QString> is a string containing up to 300 ASCII characters.
Examples
*PUD #229This oscillosc ope belongs to me stores the string "This
oscilloscope belongs to me" in the user protected data area.
*PUD? might return #221PR OPERTY OF COMPANY X
*RCL (No Query Form)
This command restores the state of the oscilloscope from a copy of the settings
stored in memory (The settings are stored using the *SAV command).
Group
Save and Recall
Syntax
*RCL <N R1>
Related Commands
FACtory, *LRN?, RECAll:SETUp, *RST, *SAV, SAVe:SETUp
Arguments
<NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
Examples
*RCL 3 restores the oscilloscope from a copy of the settings stored in memory
location 3.
REBOOT (No Q uery Form)
Reboots the system after a short delay, emulating the front panel power button
push. The system will power back on after a 5 second delay.
Group
Miscellaneous
Syntax
REBOOT
RECAll:MASK (No Query Form)
This command recalls the mask from a specified file that was saved to the current
working directory using the SAVe:MASK command.
2-538 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Aseriesofexam
ples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module.
Group
Mask
Syntax
RECAll:MASK <QString>
Related C
ommands
SAVe:MASK
Arguments
QString is a quoted string that is the name of the mask definition being recalled
from the current working directory.
Examples
:RECall:MASK ”FOO.MSK” will recall a copy of the mask “FOO” from the
current working directory.
RECAll:SETUp (No Query Form)
Restores the state of the oscilloscope from a copy of the settings stored in memory.
The settings are stored using the
*SAV command.
Group
Save and Recall
Syntax
RECAll:SETUp {FACtory|< NR1>|<file path>}
Related Commands
FACtory, *RCL, *RST, *SAV, SAVe:SETUp, FILESystem:CWD
Arguments
FACtory restores the factory setup.
<NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
<file p ath> specifies a location for an oscilloscope setup file. <file path> is
a quoted string that defines the file name and path. Input the file path using the
form
<drive>:/<dir>/<filename>.<extension> and one or <dir>s are
optional. If you do not specify them, the oscilloscope will read the file fromthe
default directory (see FILESystem:CWD). <filename> stands for a filename; the
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-539
Commands Listed in Alphabetical Order
use of wildcard
characters in filenames is not supported. Filename extensions are
not required, but highly recommended.
Examples
RECALL:SETUP FACTORY recalls (and makes current) the oscilloscope setup
to its factory defaults.
RECALL:SETUP 2 recalls the oscilloscope setup from setup storage location 2.
RECALL:SETUP "TEK00000.SET" recalls the setup from the file TEK00000.SET
in the current working directory.
RECAll:SETUp:DEMO<x> (No Query Form)
This command recalls one of up to 22 built-in demonstration setups of oscilloscope
functionality. <x> varies by model.
Conditions
MDO only.
Group
Save and Recall
Syntax
RECAll:SETUp:DEMO<x>
Examples
RECAll:SETUp:DEMO4 recalls the Demonstration #4 setup.
RECAll:WAVEform (No Query Form)
This command (no query form) recalls a stored waveform to a reference memory
location, and, for instruments with the arbitrary waveform feature, to arbitrary
waveform edit memory (EMEM). Only the first waveform in a .CSV file is
recalled for multiple waveform .CSV files. Recall of digital waveforms (D0
through D15) is not supported.
NOTE. For MDO3000 series models, a saved ARB waveform c annot be recalled
toareferencelocation.ItcanonlyberecalledtoanEMEMlocation.However,
an AFG waveform can be recalled into either a reference or EMEM location.
Group
Save and Recall
Syntax
RECAll:WAVEform <Source>, <Destina tion>
2-540 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual