MDO3000 Programmer Manual.pdf - 第338页

Commands Listed in A lphabetical Order NOTE. Do not use DHCP/BOOTP sear ching if your oscilloscope has been assigned a static addr ess on a network. If you set this command to ON, the DHCP/BOOTP sear ch will delete or ch…

100%1 / 1158
Commands Listed in Alphabetical Order
Group
Email
Syntax
EMAIL:SETUp:SMTPPort <NR1>
EMAIL:SETUp:SMTPPort?
Arguments
Integer that represents the email SMTP server port number.
Examples
EMAIL:SETUP:SMTPPORT 19 sets the email SMTP server port number to 19.
EMAIL:SETUp:SMTPServer
Sets or returns the email SMTP server DNS name for the common server setup
information that is shared between the Act on Event commands and the Hardcopy
Email commands.
Group
Email
Syntax
EMAIL:SETUp:SMTPServer <QString>
EMAIL:SETUp:SMTPServer?
Arguments
Integer that represents the email SMTP server DNS name.
Examples
EMAIL:SETUP:SMTPSERVER“SMTP1.mail.com” sets the email SMTP server to
SMTP1.mail.com.
ETHERnet:DHCPbootp
This command specifies the network initialization search for a DHCP/BOOTP
server.
Group
Ethernet
Syntax
ETHERnet:DHCPbootp {ON|OFF}
ETHERnet:DHCPbootp?
Arguments
ON enables the oscilloscope to search the network for a DHCP or BOOTP server
in order to automatically assign a dynamic IP address to the oscilloscope.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-307
Commands Listed in Alphabetical Order
NOTE. Do not use
DHCP/BOOTP searching if your oscilloscope has been
assigned a static address on a network. If you set this command to ON, the
DHCP/BOOTP search will delete or change your static IP address information.
OFF disables the oscilloscope to search the network for a DHCP or BOOTP server.
Examples
ETHERNET:DHCPBOOTP ON sets the oscilloscope to search for a DHCP or BOOTP
server and assign a dynamic IP address to the oscilloscope.
ETHERnet:DNS:IPADDress
This command specifies the network Domain Name Server (Dns) IP address.
Group
Ethernet
Syntax
ETHERnet:DNS:IPADDress <QString>
ETHERnet:DNS:IPADDress?
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:DNS:IPADDRESS “128.196.13.352” sets the Dns IP address that
the oscilloscope uses to communicate with the network.
ETHERnet:DOMAINname
This command specifies the network domain name.
Group
Ethernet
Syntax
ETHERnet:DOMAINname <Qstring>
ETHERnet:DOMAINname?
Arguments
<QString> is the network domain name, enclosed in quotes.
Examples
ETHERNET:DOMAINNAME “Alpha1.Mycorp.com” sets the domain name that
the oscilloscope uses to communicate with the network.
2-308 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
ETHERnet:ENE
T:ADDress? (Query Only)
Returns the Ethernet address value assigned to the oscilloscope. This is assigned
at the factory and can not be changed.
Group
Ethernet
Syntax
ETHERnet:ENET:ADDress?
Examples
ETHERNET:ENET:ADDRESS? returns an Ethernet address such as
08:00:11:01:02:03
ETHERnet:GATEWay:IPADDress
This command specifies the remote interface gateway IP address.
Group
Ethernet
Syntax
ETHERnet:GATEWay:IPADDress <QString>
ETHERnet:GATEWay:IPADDress?
Related Commands
ETHERnet:NETWORKCONFig, ETHERnet:IPADDress, ETHERnet:
SUBNETMask
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:GATEWAY:IPADDRESS “128.143.16.1” sets the gateway IP
address.
ETHERnet:HTTPPort
This command specifies the remote interface HTTP port value.
Group
Ethernet
Syntax
ETHERnet:HTTPPort <QString>
ETHERnet:HTTPPort?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-309