MDO3000 Programmer Manual.pdf - 第283页

Commands Listed in Alphabetical Order Syntax CONFIGuration :EXTVIDEO? Related Commands (See page 2-76, T rigger Command Gro up .) Returns <NR1> = 1 if the extended video trigger features are present. <NR1> = …

100%1 / 1158
Commands Listed in Alphabetical Order
CONFIGuratio
n:DIGITAl:NUMCHANnels? (Query Only)
This query returns the number of digital channels.
Group
Configuration
Syntax
C
ONFIGuration:DIGITAl:NUMCHANnels?
Returns
<NR1>
CONFIGuration:DVM? (Query Only)
Indicates whether the Digital Voltmeter hardware is present, and the DVM feature
is enabled.
Group
Configuration
Syntax
CONFIGuration:DVM?
Returns
1 indicates that the Digital Voltmeter hardware is present and the DMV feature is
enabled.
0 indicates that either the digital volt meter hardware is not present, or thefeature
is not enabled.
Examples
CONFIG:DVM? might return 1, indicating that the hardware is present and the
featureisenabled.
CONFIGuration:EXTVIDEO? (Query Only)
This query returns a boolean value to indicate whether the extended video trigger
features are present.
Conditions
This feature requires installation of a DPO4VID application module for allexcept
the MDO3000 and MDO4000C series.
Group
Configuration
2-252 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Syntax
CONFIGuration
:EXTVIDEO?
Related Commands
(See page 2-76, Trigger Command Group.)
Returns
<NR1> = 1 if the extended video trigger features are present.
<NR1> = 0 if the extended video trigger features are not present.
CONFIGuration:HISTOGRAM? (Query Only)
This query returns a boolean value to indicate whether the waveform histogram
featureispresent.
Group
Configuration
Syntax
CONFIGuration:HISTOGRAM?
Related Commands
(See page 2-29, Histogram Command Group.)
Returns
<NR1> = 1 if the histogram feature is present.
<NR1> = 0 if the histogram feature is not present.
CONFIGuration:NETWORKDRIVES? (Query Only)
This query returns a boolean value to indicate whether network drives are
supported.
Group
Configuration
Syntax
CONFIGuration:NETWORKDRIVES?
Related Commands
(See page 2-27, File System Command Group.)
Returns
<NR1> = 1 if network drives are supported.
<NR1> = 0 if network drives are not supported.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-253
Commands Listed in Alphabetical Order
CONFIGuratio
n:NUMMEAS? (Query Only)
This query returns the maximum number of periodic measurements.
Group
Configuration
Syntax
CONFIGuration:NUMMEAS?
Related Commands
(See page 2-36, Measurement Command Group.)
Returns
<NR1>
CONFIGuration:REFS:NUMREFS? (Query Only)
This query returns the number of reference waveforms.
Group
Configuration
Syntax
CONFIGuration:REFS:NUMREFS?
Related Commands
(See page 2-9
1
,
Vertical Command Group.)
Returns
<NR1>
CONFIGuration:RF:ADVTRIG? (Query Only)
This query returns a boolean value to indicate whether the advanced RF trigger
and analysis feature is present. (Enabling this feature requires an MDO4000/B/C
Series oscilloscope and installation of a MDO4TRIG application module.)
Group
Configuration
Syntax
CONFIGuration:RF:ADVTRIG?
Related Commands
(See page 2-47, RF Command Group .)
2-254 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual