MDO3000 Programmer Manual.pdf - 第180页

Commands Listed in A lphabetical Order Syntax AUTOSet:ENAbl e {OFF|ON |0| 1} AUTOSet:ENAbl e? Arguments O F Fo r0 disables autoset. ON or 1 enables autoset. Examples AUTOSET:ENABL E 1 enables the front-panel Autoset butt…

100%1 / 1158
Commands Listed in Alphabetical Order
Arguments
POWer sets the a
pplication type to power analysis.
LIMITMask sets the application type to limit mask test.
VIDPic sets the application type to video picture.
ACTONEVent sets the application type to act on event.
NONe
Returns
The query form will return NONe if none of the supported application modules
are installed.
Examples
APPL:TYP? might return LIMITMASK, indicating that the DPO4LMT application
module is currently being used.
AUTOSet (No Query Form)
Sets the vertical, horizontal, and trigger controls of the oscilloscope to
automatically acquire and display the selected waveform.
Group
Miscellaneous
Syntax
AUTOSet {EXECute|UNDo}
Arguments
EXECute autosets the displayed waveform.
UNDo restores the oscilloscope settings to those present prior to the autoset
execution.
Examples
AUTOSET EXECUTE vertical, horizontal, and trigger controls of the oscilloscope to
automatically acquire and display all waveforms which are turned on.
AUTOSet:ENAble
Enables or disables the autoset feature. This is useful for classroom purposes
where the instructor wants the students to achieve the desired instrument settings
without the benefit of the autoset feature. This setting is not saved in setupfilesor
SET? or *LRN? queries. The default state is 1 (autoset enabled).
Group
Miscellaneous
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-149
Commands Listed in Alphabetical Order
Syntax
AUTOSet:ENAbl
e {OFF|ON |0|1}
AUTOSet:ENAble?
Arguments
OFFor0disables autoset.
ON or 1 enables autoset.
Examples
AUTOSET:ENABLE 1 enables the front-panel Autoset button.
AUTOSET:ENABLE? might return AUTOSET:ENABLE 0 indicating that the autoset
feature is disabled.
AUXin? (Query Only)
Returns all Aux Input connector parameters.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin?
AUXin:PRObe
Returns all information concerning the probe attached to Aux Input connector.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin:PRObe
AUXin:PRObe?
Examples
AUXIN:PROBE? might return AUXIN:PROBE:ID:TYPE "No Probe
Detected";SERNUMBER "";:AUXIN:PROBE:UNITS "";RESISTANCE
1.0000E+6
giving information about the probe attached to the Aux Input
connector.
2-150 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
AUXin:PRObe:
AUTOZero (No Query Form)
This command executes the attached probe’s Auto Zero function, for probes that
support this feature. See your probe documentation for more details.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin:PRObe:AUTOZero EXECute
Arguments
EXECute sets the probe to autozero.
Examples
AUXin:PRObe:AUTOZero EXECute performs the AutoZero function in the
probe.
AUXin:PRObe:CALibrate:CALIBRATABLe? (Query Only)
This query indicates whethe
r the attached probe is calibratable. It returns a
boolean value.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin:PRObe:CALibrate:CALIBRATABLe?
Examples
AUXin:PRObe:CALibrate:CALIBRATABLe? might return 0, indicating that the
probe attached to the Aux Input connector is not calibratable.
AUXin:PRObe:COMMAND (No Query Form)
Sets the state of the probe control specified with the first argument to the state
specified with the second argument. The commands and states are unique to the
attached probe type. Only certain VPI probes support this command. See the
probe documentation for how to set these string arguments.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-151