MDO3000 Programmer Manual.pdf - 第362页
Commands Listed in A lphabetical Order NOTE. The Har dc opy command with no ar guments is equivalent to pressing the “Har dCopy” button on the fr ont panel, when the data is sent to the printer . As ther e is no fr ont p…
Commands Listed in Alphabetical Order
GPIBUsb:ADDr
ess? (Q uery Only)
Returns the current GPIB address setting for a connected TEK-USB-488 adaptor
module.
Group
Miscellaneous
Syntax
GPIBUsb:ADDress?
GPIBUsb:ID? (Query Only)
Returns the identification string of the connected TEK-USB-488 adaptor module
and firmware version. If a TEK-USB-488.2 module is not connected, the system
returns “Not detected”.
Group
Miscellaneous
Syntax
GPIBUsb:ID?
HARDCopy (No Query Form)
Sends a hard copy of the screen display to the currently active printer usingthe
current palette and layout settings.
Group
Hard Copy
Syntax
HARDCopy {STARt}
Related Commands
*WAI, *CLS
Arguments
STARt sends a block of data representing the current screen image to
the requested port. The data sent is in the image format specified by the
SAVe:IMAGe:FILEFormat command and the compression level is controlled
by the selected format (BMP and TIFF are uncompressed whereas PNG is
compressed). The HARDCopy:INKSaver determines whether the data sent is
in InkSaver mode.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-331
Commands Listed in Alphabetical Order
NOTE. The Hardc
opy command with no arguments is equivalent to pressing the
“HardCopy” button on the front panel, when the data is sent to the printer. As
there is no front panel equivalent of the HARDCOPY START, you can choose to
save the images to a different location u sing the “SAVE” button.
Examples
HARDCOPY initiates a screen copy to the active printer.
HARDCopy:ACTIVeprinter
This command specifies the currently active printer. When a hard copy operation
is performed, the output will be sent to this printer. One of two methods of
specifying the printer can be used: specifying an index value obtained from
looking at the list of attached printers or by specifying the printer name.
Group
Hard Copy
Syntax
HARDCopy:ACTIVeprinter {<NR1>|<name>}
HARDCopy:ACTIVeprinter?
Arguments
<NR1> is the index of the desired printer as returned from HARDCopy:PRINTer:
LIST?
<name> is the name of the printer as specified in the printer list. This name is case
sensitive and must be entered exactly as shown in the list.
HARDCopy:INKSaver
Changes hard copy output to print traces and graticule on a white background
while retaining waveform color information (except for channel 1, which prints as
dark blue because yellow does not show up well and is difficult to see on a white
background). This option can significantly reduce print time and quantities of ink
required compared with WYSIWYG dark background images.
Group
Hard Copy
Syntax
HARDCopy:INKSaver?
Arguments
ON or <NR1> ≠ 0 sets the ink saver mode on.
OFF or <NR1> = 0 sets the ink saver mode off.
2-332 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Examples
HARDCOPY:INKS
AVER ON
will cause subsequent hard copy output to display the
screen on a white background.
HARDCopy:LAYout
This command specifies the page orientation for hard copy. If you set the layout to
LANdscape, the printer will print hard copies in landscape mode where the long
edge of the screen will print to the long edge of the sheet of paper. If you set the
layout to P
ORTRait, the printer will print hard copies in portrait mode.
This command is not applicable for PictBridge hardcopies.
Group
Hard Copy
Syntax
HARDCopy:LAYout {PORTRait|LANdscape}
HARDCopy:LAYout?
Arguments
PORTRait orients the screen image vertically on the printed page.
LANdscape orients the screen image horizontally on the printed page.
Examples
HARDCOPY:LAYOUT LANDSCAPE sets the hard copy page orientation to Landscape.
HARDCOPY:LAYOUT? might return :HARDCOPY:LAYOUT PORTRAIT indicating
that the hard copy page orientation is set to portrait.
HARDCopy:PREVIEW (No Query Form)
Displays a preview of the current screen contents with the InkSaver palette
applied.
Group
Hard Copy
Syntax
HARDCopy:PREVIEW {ON|OFF|<NR1>}
Arguments
ON or <NR1> ≠ 0 turns preview mode on.
OFF or <NR1> = 0 turns preview mode off.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-333