MDO3000 Programmer Manual.pdf - 第269页

Commands Listed in Alphabetical Order CONFIGuratio n:ANALOg:NUMCHANnels? ( Query Only) This q uery return s the number of analog channels. Group Configuration Syntax CONFIGuration :ANALOg:NUMCHANn els? Returns <NR1>…

100%1 / 1158
Commands Listed in Alphabetical Order
Group
Configuration
Synta
x
CONFIGuration:ANALOg:GNDCPLG?
Related Commands
(See page 2-91, Vertical Command Group.)
Returns
0
CONFIGuration:ANALOg:MAXBANDWidth? (Query Only)
This query returns the maximum bandwidth for analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:MAXBANDWidth?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR3>, which is a floating point number that represents the maximum bandwidth,
in hertz, for the analog channels.
CONFIGuration:ANALOg:MAXSAMPLERate? (Query Only)
This query returns the maximum sample rate for analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:MAXSAMPLERate?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR3>, which is a floating point number that represents the maximum sample
rate, in samples per second, for the analog channels.
2-238 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
CONFIGuratio
n:ANALOg:NUMCHANnels? (Query Only)
This query returns the number of analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:NUMCHANnels?
Returns
<NR1>
CONFIGuration:ANALOg:RECLENS? (Query Only)
This query returns a comma-separated list of supported record lengths for the
analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:RECLENS?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
List of <NR1> values.
CONFIGuration:ANALOg:VERTINVert? (Query Only)
This query returns a boolean value to indicate whether the vertical invert feature
for analog channels is present.
Group
Configuration
Syntax
CONFIGuration:ANALOg:VERTINVert?
Related Commands
(See page 2-91, Vertical Command Group.)
Returns
<NR1> = 1 if the vertical invert feature is present.
<NR1> = 0 if the vertical invert feature is not present.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-239
Commands Listed in Alphabetical Order
CONFIGuratio
n:APPLications:CUSTOMMask? (Query Only)
Indicates whether the Custom Mask test feature is present and enabled.
Conditions
Requires installation of a DPO4LMT application module, or an MDO3LMT
for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:APPLications:CUSTOMMask?
Returns
1 indicates that the Custom Mask test feature is present and enabled.
0 indicates that either the Custom Mask test feature is not present, or it is not
enabled.
Examples
CONFIG:APPL:CUSTOMM? might return 1, indicating that the feature is present
and enabled.
CONFIGuration:APPLications:LIMITMask? (Query Only)
This query returns a boolean value to indicate whether the optional mask/limit
test feature is present.
Conditions
Requires installation of a DPO4LMT application module, or MDO3LMT for
MDO3000 models)
Group
Configuration
Syntax
CONFIGuration:APPLications:LIMITMask?
Related Commands
(See page 2-31, Mask Command Group.)
Returns
1 indicates the mask/limit test feature is present.
0 indicates the mask/limit test feature is not present.
2-240 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual