MDO3000 Programmer Manual.pdf - 第341页

Commands Listed in Alphabetical Order Related Commands ETHERnet:LXI: LAN:P ASSW ord:ESCOPEENABle , ETHERnet:P ASSW ord Arguments 0, OFF — turns off the LXI password feature. This is the default. 1, ON — turns on the LXI …

100%1 / 1158
Commands Listed in Alphabetical Order
Arguments
<QString> is an
integer port number, enclosed in quotes.
NOTE. Consider the following if you are using the e*Scope™ control software . If
you don't e nter a port address in the URL, then the
ETHERnet:HTTPPort value
must be set to "80", which is the default port for HTTP protocol. If you use a URL
with a port address (for example: http://DPO4104B-04WKL4:1234), the port
number is specified by the number after the colon. Set the
ETHERnet:HTTPPort
value to thi
s same number.
Examples
ETHERNET:HTTPPORT “80” sets the HTTP port value to 80.
ETHERnet:IPADDress
This comm
and specifies the IP address assigned to the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:IPADDress <QString>
ETHERnet:IPADDress?
Related Commands
ETHERnet:NETWORKCONFig,
ETHERnet:SUBNETMask,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:IPADDRESS “123.121.13.214” sets the oscilloscope's IP address.
ETHERnet:LXI:LAN:PA SSWord:ENABle
This command controls whether LXI (LAN eXtensions for Instrumentation) is
password protected.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:PASSWord:ENABle {0|1|ON|OFF}
ETHERnet:LXI:LAN:PASSWord:ENABle?
2-310 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Related Commands
ETHERnet:LXI:
LAN:PASSWord:ESCOPEENABle, ETHERnet:PASSWord
Arguments
0, OFF — turns off the LXI password feature. This is the default.
1, ON — turns on the LXI password feature.
Examples
ETHERnet:L
XI:LAN:PASSWord:ENABle ON
turns on the LXI password
feature.
ETHERnet:LXI:LAN:PASSWord:ENABle? might return 1, indicating that this
feature is turned on.
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle
This command controls whether to use the LXI password for e*Scope (effectively
equal to enabling password protection for e*Scope). With e*Scope, you can
access any Internet-connected MDO4000/B/C, MSO/DPO4000B or MDO3000
Series Oscilloscope from a web browser.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle {0|1|ON|OFF}
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle?
Related Commands
ETHERnet:PASSWord,
ETHERnet:LXI:LAN:PASSWord:ENABle
Arguments
0, OFF turns off the LXI password feature for e*Scope. This is the default.
1, ON turns on the LXI password feature for e*Scope.
Examples
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle ON turns on the LXI
password feature for e*Scope.
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle? might return 1, indicating
that this feature is turned on.
ETHERnet:LXI:LAN:RESET (No Query Form)
This command resets the LXI local area network. The items which this command
reset include: DHCP/BOOTP, mDNS and DNS-SD, e*Scope password protection,
LXI password protection, and e*Scope and LXI password.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-311
Commands Listed in Alphabetical Order
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:RESET
Examples
ETHERnet:LXI:LAN:RESET resets the LXI local area network.
ETHERnet:LXI:LAN:SERVICENAMe
This command specifies the mDNS service name used for the LXI interface.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:SERVICENAMe QString
ETHERnet:LXI:LAN:SERVICENAMe?
Arguments
QString is a quoted string of up to 64 characters that specifies the mDNS service
name used for the LXI interface.
Examples
ETHERnet:LXI:LAN:SERVICENAMe? might return "Tektronix Oscilloscope
MSO4104B 053CVV"
ETHERnet:LXI:LAN:STATus? (Query Only)
This query returns the LXI network status.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:STATus?
Related Commands
ETHERnet:PING,
ETHERnet:PING:STATus?
Returns
OK — indicates the network is running and the oscilloscope ca
n“see”thenetwork.
FAULT — indicates the network is not visible, or the network settings are incorrect.
IDENTIFY indicates that a message is being displayed on the oscilloscope’s front
panel indicating which scope the user is currently accessing.
2-312 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual