MDO3000 Programmer Manual.pdf - 第277页

Commands Listed in Alphabetical Order Syntax CONFIGuration :BUSWAVEFORMS:I2 C? Related Commands (See page 2-15, Bus Command Gr oup .) (See page 2-76, T rigger Command Gro up .) (See page 2-61, Search Command Group .) Ret…

100%1 / 1158
Commands Listed in Alphabetical Order
(See page 2-76, Tr
igger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the Ethernet feature is present.
<NR1> = 0 if the Ethernet feature is not present.
CONFIGuration:BUSWAVEFORMS:FLEXRAY? (Query Only)
This query returns a boolean value to indicate whether the optional FlexRay bus
triggering and analysis feature is present.
Conditions
This command requires a DPO4AUTOMAX application module for
DPO/MSO4000B and MDO4000/B/C models or an MDO3FLEX application
module for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:FLEXRAY?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the FlexRay bus feature is present.
<NR1> = 0 if the FlexRay bus feature is not present.
CONFIGuration:BUSWAVEFORMS:I2C? (Query Only)
This query returns a boolean value to indicate whether the optional I
2
C bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4EMBD application module, or
MDO3EMBD for MDO3000 models.
Group
Configuration
2-246 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Syntax
CONFIGuration
:BUSWAVEFORMS:I2C?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the I
2
C bus feature is present.
<NR1> = 0 if the I
2
C bus feature is not present.
CONFIGuration:BUSWAVEFORMS:LIN? (Query Only)
This query returns a boolean value to indica
te whether the optional LIN bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUTO application module, or
MDO3AUTO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:LIN?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the LIN bus feature is present.
<NR1> = 0 if the LIN bus feature is not present.
CONFIGuration:BUSWAVEFORMS:MIL1553B? (Query Only)
This query returns a boolean value to indicate whether the optional MIL-STD-1553
bus triggering and analysis feature is present.
Conditions
This feature
requires installation of a DPO4AERO application module, or
MDO3AERO for MDO3000 models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-247
Commands Listed in Alphabetical Order
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:MIL1553B?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the MIL-STD-1553 bus feature is present.
<NR1> = 0 if the MIL-STD-1553 bus feature is not present.
CONFIGuration:BUSWAVEFORMS:NUMBUS? (Query Only)
This query returns the number of bus waveforms.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:NUMBUS?
Returns
<NR1>
CONFIGuration:BUSWAVEFORMS:PARallel? (Query Only)
This query returns a boolean value to indicate whether the parallel bus triggering
and analysis feature is present.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:PARallel?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the parallel bus feature is present.
2-248 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual