MDO3000 Programmer Manual.pdf - 第647页

Commands Listed in Alphabetical Order SEARCH:SEARC H<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALi fi er This c ommand specifies the qualifier to be used when searching on the ARINC42 9 label field. The search cond…

100%1 / 1158
Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGger:A:BUS:B1:ARINC429A:ERRTYPE ANY
sets the
error type to match any of the other available error types.
SEARCH:SEARC
H1:TRIGger:A:BUS:B1:ARINC429A:ERRTYPE?
might return
PARity.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
When the search condition is set to LABel, and the qualifier is set
to either INrange or OUTrange, this command specifies the upper
value of the range for a match on the label field. (Use the command
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
to specify the lower value of the range). The default is all X's (don't care).
SEARCH<x> is the search number, which is always 1. B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
Arguments
QString is a quoted string of 8 bits. The allowable characters are 0, 1, and X.
The bits specified in the quoted string replace the least significant bits, leaving
any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
"XXXX1000" sets the upper limit of the range to XXXX1000.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue?
might return "XXXXXXXX".
2-616 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifier
This command specifies the qualifier to be used when searching on the ARINC429
label field. The search condition must be set to LABel or LABELANDDATA.
The default q
ualifier is "Equal to". SEARCH<x> is the search number, which
is always 1. B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:ARINC429A:LABel:QUALifier
{LESSthan|MOREthan|Equal|UNEQual|LESSEQual|MOREEQual|
INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:
QUALifier?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
Arguments
LESSthan sets label qualifier to less than.
MOREthan sets the label qualifier to greater than.
EQual sets the label qualifier to equal.
UNEQual sets the label qualifier to not equal.
LESSEQual sets the label qualifier to less than or equal.
MOREEQual sets the label qualifier to greater than or equal.
INrange sets the l
abel qualifier to in range.
OUTrange sets the label qualifier to out of range.
NOTE. If the sear
ch condition is set to LABELANDDATA, the label qualifier will
be locked to EQual until the search condition is changed again.
Examples
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifie r
LESSthan
sets the label qualifier to less than.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-617
Commands Listed in Alphabetical Order
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifier?
might return EQUAL indicating the label qualifier is set to =.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
This command specifies the low value to be used when searching on the
ARINC429 bus label field. The search condition must be set to LABel or
LABELANDDATA (using SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:
ARINC429A:CONDition). The defa
ultisallX's(don'tcare).SEARCH<x>isthe
search number, which is always 1. B<x> is the bus number.
Conditions
This command requires install
ation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifier
Arguments
QString is a quoted string of 8 bits. The allowable characters are 0, 1, and X.
The bits specified in the quoted string replace the least significant bits, leaving
any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
"XXXX1000" sets the upper limit of the range to XXXX1000.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue?
might return "XXXXXXXX".
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:SDI
This command specifies the value for the SDI field to be used when searching
on the ARINC429 bus data field(s). The search condition must be set to DATA
or LABELANDDATA (using SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:
ARINC429A:CONDition). The default is all X's (don't care). SEARCH<x> is the
search number, which is always 1. B<x> is the bus number.
2-618 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual