SIPLACE D4-D4i 工程师手册_EN.pdf - 第12页
Introduction Staff Qualifications and Training 1.2.6 Abbreviations 12 Service Manual SIPLACE D4/D4i
Introduction
1.2.6 Abbreviations Staff Qualifications and Training
Service Manual SIPLACE D4/D4i 11
1.2.6
1.2.6 Abbreviations
Abbreviations
1.3
1.3 Staff Qualifications and Training
Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up, op-
eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,
e.g.:
▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical
circuits and system components in accordance with normal safety standards.
▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-
ance with normal safety standards.
▪ Have received first aid training.
PA Placement area
CO Component
C&P Collect&Place
C&P12 Collect&Place head with 12 segments
C&P20 Collect&Place head with 20 segments
C&P6 Collect&Place head with 6 segments
CPP Collect&Pick&Place head
DC Dual conveyor
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
SC Single conveyor
PCB Printed circuit board
MTC Matrix tray changer
NC Nozzle changer
P&P Pick&Place
QC Quad lane conveyor
SC Station computer
TH TwinHead
VS Vision system
WPC Waffle pack changer
Introduction
Staff Qualifications and Training 1.2.6 Abbreviations
12 Service Manual SIPLACE D4/D4i
Operational Safety
2.1.1 Conventions for the use of safety instructions Safety Instructions
Service Manual SIPLACE D4/D4i 13
2
2 Operational Safety
Operational Safety
2.1
2.1 Safety Instructions
Safety Instructions
2.1.1
2.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-
ing to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the Operating Manual of the relevant machine for
all work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.