00193688-06_Installation SIPLACE Explorer2.1_EN.pdf - 第12页
1 Introduction Installation and Configuration Guide SIPLACE Explorer 1.3 Additional Remarks Edition 11/2006 EN 12 – The p age Production Summary will not update the values in the column Lot Progress of the table Lot Prog…
Installation and Configuration Guide SIPLACE Explorer 1 Introduction
Edition 11/2006 EN 1.3 Additional Remarks
11
1.3 Additional Remarks
SIPLACE Explorer Version 2.1 has the following restrictions: 1
– Factory Layout:
A SIPLACE Explorer host (the computer on which SIPLACE Explorer "Runtime Environment"
is installed) can monitor five production lines with up to 20 stations.
– Single Line Layout
A SIPLACE Explorer host (the computer on which SIPLACE Explorer "Runtime Environment"
is installed) can monitor one production line with up to 7 stations.
– From SIPLACE Explorer Version 2.0 SP1, the station GEM interface will no longer be sup-
ported i.e. data can not be recorded via the GEM interface with SIPLACE Explorer Version 2.1
or higher. If you need support for the GEM interface, please contact the SIPLACE Hotline.
– The system time on the connected machines and that belonging to the SIPLACE Explorer must
be synchronized. SIPLACE machines require the installation of TimeSync, which is included
on the Support Media CD provided with the delivery.
– The standard SIPLACE Explorer 2.1 delivery package includes support tools for SIPLACE ma-
chines. This includes all the machines listed in the "Software Version Description SIPLACE Ex-
plorer 2.1, Art. No. 00193690-05.
Support for other equipment, such as screen printers or reflow ovens is not part of the standard
SIPLACE Explorer product package.
If you want to monitor screen printers and reflow ovens with SIPLACE Explorer, this will need
to be realized as a customer-specific project. 1
– A special OIS state model has been realized in SIPLACE OIS. In SIPLACE Explorer, this OIS
state model is mapped onto the SIPLACE Explorer state model which corresponds to the SEMI
E10 state model. This may lead to deviations in the states and state periods shown for OIS and
SIPLACE Explorer. A direct comparison is therefore not possible.
– The following restriction applies to platform I (S20, S23, F4, F5, F5HM) stations with dual con-
veyors:
The page Production Summary will display Unknown in the Current Recipe List table for
the 2nd conveyor lane. 1
Reason:
Platform I stations are unable to produce different recipes, even with dual conveyors. There-
fore, only one recipe will be loaded for the SIPLACE line. This recipe will then only be assigned
to conveyor lane I by SIPLACE Explorer. 1
– The following restrictions apply to the SMA pages listed below, if no boards are placed at the
last station in the production line:
1 Introduction Installation and Configuration Guide SIPLACE Explorer
1.3 Additional Remarks Edition 11/2006 EN
12
– The page Production Summary will not update the values in the column Lot Progress of
the table Lot Progress, if the last station in the production line does not have any place-
ment contents for the recipe currently defined. In this case, the last station will conveyor the
boards through without placement. The column Lot Progress will continue to show the
name of the last recipe which had placement contents at the last station.
– Machine Navigator:
OLE value will not be shown (N/A).
– OLE / OEE Overview:
Overall Line Efficiency diagram: Values for OLE, performance and availability will not be
shown correctly.
Overall Equipment Efficiency by station diagram: station data is not shown correctly for
stations which do not place boards.
– OEE Analysis:
Table: values for performance and availability will not be shown correctly for lines and sta-
tions which do not place boards.
Overall Equipment Efficiency diagram - comparison diagram: Values for OLE, perfor-
mance and availability will not be shown correctly for the line.
– Factory Overview:
The following values will not be shown correctly or will not be updated:
OLE, Current Recipe/ Job, Last Recipe Change, Completed, Lot Progress, Average Takt
Time.
Installation and Configuration Guide SIPLACE Explorer 2 System Components and Configurations
Edition 11/2006 EN 2.1 Overview of System Components
13
2 System Components and
Configurations
2.1 Overview of System Components
SIPLACE Explorer can either be installed in SIPLACE LAN or distributed via SIPLACE and client
LANs. Users not wishing to install the complete SIPLACE Explorer program on one computer can
distribute the individual components among several computers. 2
The SIPLACE Explorer architecture is displayed in the following diagram: 2
2
Fig. 2.1 - 1 SIPLACE Explorer architecture
System
DB
System
DB
Web
Browser
applets
SMA / Line 1
...
Web
Browser
applets
SMA / Line 5
servlets, JSP
Tomcat Web Server
SIPLACE Explorer Host
SIPLACE Explorer
Applications 1.. 5
Web Clients
Software
Architecture
One or several Servers
SIPLACE
Sta tio n 1
SIPLACE
Station N
SIPLACE
St at io n 1
SIPLACE
Station N
Production Line 1 Production Line 5
...
OIS/SIS
DB
OIS/SIS
DB
...
SIPLACE OIS / SIS
compliant machines
Line 1 ... 5
System
DB
Factory Website
"Single Entry Point"