00193688-06_Installation SIPLACE Explorer2.1_EN.pdf - 第96页
4 Configuration Installation and Configuration Guide SIPLACE Explorer 4.2 Configuring the Factory Configuration Utility Edition 11/2006 EN 96 → S pecify the access dat a for the data base administrator and confirm yo ur …
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 11/2006 EN 4.2 Configuring the Factory Configuration Utility
95
→ Click on the Setup DB Connection button to start the DB Connection Wizard setup
sequence and configure the SIPLACE Explorer factory database. Follow the instructions at
“Database Connection Wizard” on page 111.
→ If the connection functions properly, you will see the following information box:
4
Fig. 4 - 31 Success
→ Click OK. The system will check the database data. If the database has data from SIPLACE
Explorer V2.0 or V1.2, you will need to convert the database for SIPLACE V2.1, due to the
changed data structure in the SIPLACE Explorer V2.1 database. In this case, the Convert
Database dialog box will open.
NOTE
Observe the following for database conversion:
- You will need database administrator rights.
- If you have started the conversion, this process can not be stopped.
- The conversion time depends on the size of the database. It may take up to an hour. 4
4
Fig. 4 - 32 Convert database
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.2 Configuring the Factory Configuration Utility Edition 11/2006 EN
96
→ Specify the access data for the database administrator and confirm your entry with OK.
→ The DB backup location dialog box will open. This will only open during conversion of the
database from V2.0 to V2.1. When converting the database from V1.2 to V2.1, the database
backup will automatically be stored in the folder in which the V2.1 is stored.
4
Fig. 4 - 33 DB backup location
→ Before performing the conversion, the system creates a backup file of the database. Specify
the folder for this file in the Folder for database backup field. Click on the Browse ...
button to select an existing folder.
→ Confirm your choice with OK. The database will be converted. The conversion time
depends on the size of the database. It may take up to an hour.
4
Fig. 4 - 34 DB backup
→ After successful conversion of the database, the following information window will open:
4
Fig. 4 - 35 Success
→ Click OK. The Factory Configuration Utility dialog box will open.
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 11/2006 EN 4.2 Configuring the Factory Configuration Utility
97
4.2.2 Configuring Production Lines
The SIPLACE Explorer Factory Configuration Utility can be used to add production lines to an ex-
isting list of lines to be monitored. This is performed by calling up the relevant production line data
from the SIPLACE Explorer host. A list of the lines already configured in SIPLACE Explorer will
be provided via the connection to the SIPLACE Explorer host. 4
NOTE
We do not recommend that you change the production line data in SIPLACE Explorer Factory
Configuration Utility. If you do so, you must also adjust/synchronize this data in the SIPLACE
Explorer host. 4
After editing the data in the Factory Configuration Utility, save the modified data in the factory da-
tabase in which all Factory Configuration Utility data are stored. During data backup, data is sent
between the SIPLACE Explorer line host and the factory host. To be more exact, the sequence of
transfer is from the SIPLACE Explorer factory host to the line host and from the SIPLACE Explorer
line host to the SIPLACE Explorer factory host. 4
Transfer of data from SIPLACE Explorer factory host to SIPLACE Explorer line host: 4
– Factory calendar
– Factory database settings
– Central user management, with e-mail accounts
Transfer of data from SIPLACE Explorer line host to SIPLACE Explorer factory host: 4
– Line names
–Line URLs