SM411 Service Manual(CHI).pdf - 第364页
Samsung Component Placer SM41 1 Service Manual 6-32 连接器功能说明及连接程序 CN Connector Connection Module CN1 BORD DC 24V POWER CN2 Front Y -axis Limit Sensor Connection CN3 Rear Y -axis Limit Sensor Connection CN4 Left Conveyor…
X-Y Frame
6-31
3. 请分离连接在Axis Sensor Board的所有连接器。
4. Axis Sensor Board 分离后, 替换成新的 Axis Sensor Board。
5. 组装. Axis Sensor Board时，请参考以下的照片。
AXIS SENSOR BOARD 본체조립
장비 전면 기준 하단부
우측 기둥 사이에 부착
①SUPPORT를4개소에먼저부착후그위에
BOARD위치시켜SCREW(M3*6)로고정
측면 사진(SUPPORT 부착)
4개소
6. 正确连接连接器后，打开设备前面的Main Switch，启动PC，检点 X, Y, Z, W
cv 轴传感器的正常工作与否。
Cover的螺丝位置（共2处）
AXIS SENSOR BOARD本体组装
SUPPORT先粘贴在4处后，BOARD位于此
上面后用SCREW（M3*6）固定
粘贴在设备正面为
基准底部右侧柱子
之间
侧面照片（粘贴SUPPO
RT）
Samsung Component Placer SM411 Service Manual
6-32
连接器功能说明及连接程序
CN Connector Connection Module
CN1 BORD DC 24V POWER
CN2 Front Y-axis Limit Sensor Connection
CN3 Rear Y-axis Limit Sensor Connection
CN4 Left Conveyor Sensor Interface
CN5 Right Conveyor Sensor Interface
CN6 Front and Rear Feeder unlock Sensor Interface
CN9 Twin Servo Board unlock Interface
CN10 VME FD Board Interface
CN11 X7043 Step control Board Interface
Axis Sensor Board Interface (1/2)
Axis Sensor Board Interface (2/2)
X-Y Frame
6-33
Board上的LED状态转换(ON/OFF)检查
Table 6-1. The definition for the state of LED on the axis sensor board.
。
Mark Definition
Sensor 感知时
LED 状态
Sensor 非感知
时LED 状态
LED 1 Y11H Y11-HOME On Off
LED 2 Y11PL Y 11+LIMIT Off On
LED 3 Y1NL Y 11–LIMIT Off On
LED 4 Y21-H Y21-HOME On Off
LED 5 Y21-PL Y21 +LIMIT Off On
LED 6 Y21-RL Y21–LIMIT Off On
LED 7 WDH PCB IN # 1 On On
LED 8 WDP PCB IN # 2 On On
LED 9 WDM Board out # 1 On On
LED 10 Z1H Front Work # 1 On Off
LED 11 Z2H Rear Work # 1 On Off
LED 12 Z3H PCB out # 1 On Off
LED 13 Z4H PCB out #2 On Off
LED 14 Z5H Board out # 1 On Off
LED 15 Z6H Board out # 2 On Off
LED 16 SWH Rear Work # 2 On Off
LED 17 R12H Reserve # 1 On Off
LED 18 R34H Reserve # 2 On Off