4OM-1733-005w_F8.pdf - 第101页

4OM-1733 1-4-28 4.7.3 Diffusion Plate Cleaning Cycle : Every Month (Required Time : 5 minutes) Diffusion Plate Fig. 4A4-36 Procedure ( 1) Store all nozzles in the nozzle stocker (housing) through window navigations. Refe…

4OM-1733

1-4-27

4.7.2 Linear Measure (Light Projector and Receiver) Cleaning

Cycle : Every Day (Required Time : 5 minutes)

Linear Measure Sensor

(Light Emitter)

Linear Measure Sensor

(Light Receiver)

Fig. 4A4-35

Procedure

When any fat or oil is stuck to the line sensor, rub off the dirt using a cotton

applicator dipped in dehydrated ethanol.

1211-002

4.7 Head Section

4OM-1733

1-4-28

4.7.3 Diffusion Plate Cleaning

Cycle : Every Month (Required Time : 5 minutes)

Diffusion Plate

Fig. 4A4-36

Procedure

(1) Store all nozzles in the nozzle stocker (housing) through window navigations.

Reference

Refer to "5. Nozzle Change Window" in "Chapter 6 (Vol. 2)" for the

procedure of nozzle storage.

(2) Wipe the diffusion plate with a dry lens cleaning cloth.

Notice

Sebum or oil should not adhere to the surface of the diffusion plate.

1208-001

4.7 Head Section

4OM-1733

1-4-29

4.7.4 Center Spline Oiling

Cycle : Every 3 Months (Required Time : 4 minutes)

Grease : DAPHNE EPONEX GREASE No.1

Center Spline

Fig. 4A4-37

Procedure

Apply grease to the groove of the center spline with a syringe.

Note

Use No. 19 (brown) nozzle.

No.19

Fig. 4A4-38

1211-002

4.7 Head Section